Ships in 1-5 business days

EOTECH HWS XPS3-0

ITAR
This product is regulated by ITAR. It can only be shipped in the USA.
$700.00

In Stock

Video | What’s Included | Specs | Pictures | FAQ | Related Info

Sometimes optics come down to personal preference. Our two red dot choices for carbines are the Aimpoint T2 (or M5) and EOTECH series. The EOTECH has the clearer glass of the two options, which becomes particularly useful when engaging at longer distances.

The XPS3 sits at absolute co-witness height. Back up ironsights can be seen inside the window, dead center. Buttons on the backside allow you to toggle through the 20 daylight brightness settings, and the NV button switches to a dim mode for use with night vision. The optic can be seen in NV mode by either running a PVS-14 mounted to the rail behind the EOTECH, or by getting a cheekweld while running bino NODs.

Back to top ↑

OVERVIEW VIDEO

Back to top ↑

WHAT’S INCLUDED


One EOTECH Holographic Weapon Sight XPS3; Quick-Start Guide; Warranty Card; One CR123 Battery; Protective Case.

We include an 8.5″ x 11″ rifle zero target with every red dot. We recommend a 50/200 meter zero for most 5.56 rifles. (Click on the thumbnail for a printable version)
How to Zero in 2 Minutes – Video – T.REX ARMS

Back to top ↑

SPECS


Features the standard 68 MOA bullseye ring with center 1 MOA dot.

ReticleCircle 1-Dot (Night Vision Compatible)
Dimensions L X W X H3.8″ x 2.1″ x 2.5″
(96.5 x 53.3 x 63.5 mm)
Weight9.0 oz (255 g)
Water Resistance33ft (10 m) depth
Mount1″ Weaver or MIL-STD-1913 (Picatinny) Rail
Windage & Elevation Adj0.5 MOA per click
Brightness Settings20 Daylight Settings
10 Night Vision Compatible Settings
Gen I-III Night Vision
Power Source1 x CR123 battery
Battery Life1,000 continuous hours at nominal setting 12 (out of 20 Daylight settings) at room temperature
Operating Temperature-40°F to 140°F (-40°C to 60°C)
Country of OriginMade in USA

Back to top ↑

PICTURES

Back to top ↑

FAQ

So, what is the difference between the XPS and the EXPS?
Watch this video that covers the basic differences between the two. The biggest difference is the height at which they sit on a rifle.
How does the EOTECH XPS3 compare weight-wise to a T2?
A T2 with a Scalarworks LEAP is 4.97oz, the EOTECH XPS3 is 9oz. The EXPS3 is 11.2oz. If you want to know more about how the EOTECH compares to the T2, you can read our article about it here.
You can’t leave the optic on all the time. Is this a problem for home defense? What’s the auto shut off like?
It could be. The EOTECH is definitely a more intensive product. You have to manage it more than an Aimpoint. If you turn on/adjust the optic with the up arrow brightness setting, the auto shut off is 8 hours. If you turn on/adjust the optic with the down arrow brightness setting, the auto shut off is 4 hours. The 8/4 hour shut off is toggled by the last push button used. And resets once a button is pressed. Pretty cool actually.
How clear is the glass?
In our opinion, the EOTECH series appears to have the clearest glass of any optic available right now. Making it very handy for longer range shooting. Combine that with the crisp 1 MOA center dot and you’re golden.
Are the EOTECHs good now? Wasn’t there some sort of scandal?
There was. The responsible parties were dealt with, reparations were made to both the military and commercial market. The question shouldn’t just be: “Was there wrongdoing?” The question should be: “How was it dealt with? Were things made right?” If things hadn’t been made right, we wouldn’t be selling EOTECH products.

Back to top ↑

How to Zero in 2 Minutes – T.REX ARMS

EOTECH EXPS vs. EOTECH XPS – Video – T.REX ARMS

What optic height should I go with? – Help – T.REX ARMS

Our Most Recommended Rifle Upgrades – Help – T.REX ARMS

EOTECH vs. Aimpoint T-2 – Help – T.REX ARMS

Back to top ↑

You may also like…