TC 55-509 ·Army ·2009 Marine Engineman`s Handbook
Marine engineman's handbook: marine engineering safety, principles of engines, and operation of Army watercraft propulsion plants (2009).
TC 55-60-17 ·Army ·2000 Training Program for the 50,000-POUND Rough-Terrain Container Handler
This chapter explains risk management as it applies to rough terrain container handler training. Refer to FM 101-5, Appendix J, for more detailed risk management guidance. 1-2. BACKGROUND. Ground vehicle accidents cost the Army millions of…
TC 55-60-18 ·Army ·2008 Training Program for the Kalmar 53,000-POUND Rough Terrain Container Handler (Rtch)
This training circular (TC) provides a training program for the Kalmar 53,000-pound Rough Terrain Container Handler (RTCH) according to AR 600-55. It provides standardized training and testing in the operation, preventive maintenance, and…
TC 55-88-1 ·Army ·2008 Rail Handbook for Air Brake and Train Handling Rules
This handbook provides rules on air brake and train handling (ABTH) for train crew members conducting rail operations on continental United States (CONUS) Department of Defense (DOD) installations.
TC 6-0 ·Army ·2021 Training the Command and Control Warfighting Function
This publication is updated with the command and control warfighting function, whereas the previous version was written when doctrine still referred to the mission command warfighting function. Command and control is the exercise of…
TC 6-02.1 ·Army ·2019 The United States Army Signal Corps 2019 Training Strategy
11 July 2019 TC 6-02.1 1-1 Chapter 1 The Operational Challenge OPERATIONAL CONTEXT THE EMERGING OPERATIONAL ENVIRONMENT 1-1. The character of war is evolving. War in the emerging operational environment (OE) will be fought against…
TC 6-02.6 ·Army ·2017 Grounding Techniques for Tactical Equipment and Systems
This training circular is a guide to proper earth grounding methods and procedures for use with tactical systems. It describes different earth grounding systems and provides guidance on the proper methods for their installation. Earth…
TC 6-6 ·Army ·2018 Training the Mission Command Warfighting Function: Transitioning to a Joint Headquarters
The Army defines mission command as the exercise of authority and direction by the commander using mission orders to enable disciplined initiative within the commander's intent to empower agile and adaptive leaders in the conduct of…
TC 7-0.1 ·Army ·2025 After Action Reviews
TC 7-0.1, After Action Reviews (AAR), expands on the fundamental concepts of after action reviews as a primary tool leaders use in planning and conducting effective training evaluations as discussed in the Army's training doctrine in ADP…
TC 7-0.4 ·Army ·2025 Training and Evaluation Outlines
The U.S. Army is a standards-based organization that establishes and adheres to clear, uniform standards for everything from individual performance to collective operations. These standards ensure consistency, accountability, and…
TC 7-100 ·Army ·2010 Hybrid Threat
This TC will address an emerging category of threats and activities that do not fit into the traditional understanding of conventional and unconventional war. It will focus on hybrid threats as simultaneous combinations of various types of…
TC 7-100.2 ·Army ·2011 Opposing Force Tactics
This training circular (TC), as part of the TC 7-100 series, describes an opposing force (OPFOR) that exists for the purpose of training U.S. forces for potential combat operations. This OPFOR reflects a composite of the characteristics of…
TC 7-100.3 ·Army ·2014 Irregular Opposing Forces
This training circular (TC), as part of the TC 7-100 series, addresses the irregular opposing force (OPFOR), which in Army training exercises represents a composite of actual threats and enemies that comprise irregular forces. The three…
TC 7-100.4 ·Army ·2015 Hybrid Threat Force Structure Organizational Guide
This manual is part of the 7-100 series, which describes the Hybrid Threat that exists for the purpose of training U.S. forces for potential combat operations. The Hybrid Threat reflects the characteristics of military and irregular forces…
TC 7-101 ·Army ·2010 Exercise Design
This training circular (TC) outlines a methodology for designing and executing training exercises. It describes planning procedures and methodologies, responsibilities, and analysis for those who plan and control Army exercises intended as…
TC 7-102 ·Army ·2014 Operational Environment and Army Learning
Training Circular (TC) 7-102, Operational Environment and Army Learning, is a practical guide on how to integrate the conditions of an operational environment (OE) into robust, relevant, and realistic training, professional education, and…
TC 7-21.13 ·Army ·2025 The Soldier'S Guide
1 17 September 2025 TC 7-21.13 Chapter 1 The Army Profession THE ARMY PROFESSION 1-1. The Army has a dual nature as both a military department of government and a trusted military profession. The character of the Army as an institution and…
TC 8-13 ·Army ·2021 Tactical Hospital Infrastructure
Since the Vietnam War, hospitalization has evolved and changed to better support tactical operations. Various modular hospitals were developed to meet requirements identified in national policies and numerous updates have been made to…
TC 8-250 ·Army ·2023 Behavioral Science Support for Detainee Operations and Intelligence Interrogations
15 March 2023 TC 8-250 1-1 Behavioral Science Support for Detainee Operations and Intelligence Interrogations Introduction 1-1. This training circular provides overarching technical guidance and direction to the Army concerning behavioral…
TC 8-800 ·Army ·2021 Medical Education and Demonstration of Individual Competence
General The mission of the Army is to train to fight and win. The mission of the Combat Medic is to provide the medical treatment necessary to sustain the combat Soldier in support of the mission. Training Soldiers, leaders and units is…
TC 9-237 ·Army ·1993 Operator`s Circular Welding Theory and Application
Operator's circular on welding theory and application: welding processes, safety precautions, print reading, and metal joining for maintenance personnel (1993).
TC 9-524 ·Army ·1996 Fundamentals of Machine Tools
The purpose of this training circular is to provide a better understanding of power-driven machine tools. It also supplements technical manuals in the 9-3400-series covering power-driven machine tools. One of the main objectives is for…
TC 9-56 ·Army ·1969 SKS Rifle, Simonov Type 56
THE SIMONOV SEMIAUTOMATIC CARBINE (SKS) General The Soviet-designed Simonov semiautomatic carbine (fig1 ), a gas-operated, integral box magazine-fed weapon equipped with a folding blade bayonet, is now obsolete in the Soviet Army, but is…
TC 9-60 ·Army ·2004 Communications-Electronics Fundamentals, Basic Principles of Alternating Current and Direct Current
This publication is a reference TC for the electronics-engineering field. It provides information for the 35-series MOSs. This publication provides background knowledge for the electronics technician. The technician is required to safely…
TC 9-62 ·Army ·2005 Communications-Electronics Fundamentals: Solid State Devices and Solid State Power Supplies and Amplifiers
Semiconductors have electrical properties somewhere between those of insulators and conductors. The use of semiconductor materials in electronic components is not new. Some devices are as old as the electron tube. Two of the most well…
TC 9-64 ·Army ·2004 Communications-Electronics Fundamentals: Wave Propagation, Transmission Lines, and Antennas
1-1 Chapter 1 Wave Propagation The methods used to propagate (transmit) waves through space are based on the same physical principles today as they were 70 years ago. In this chapter, we discuss propagation theory on an introductory level,…
TC 9-72 ·Army ·2005 Communication-Electronics Fundamentals: Digital Computers
Operational Concepts GENERAL PURPOSE COMPUTERS 1-19. Most people will probably use this type of computer. General purpose computers are designed to perform a wide variety of functions and operations. The reason they can perform a wide…
TC 90-1 ·Army ·2008 Training for Urban Operations
Fort Benning, GA 31905-5593 Uniforms shown in this manual were drawn without camouflage for clarity of the illustration. Unless this publication states otherwise, masculine nouns and pronouns may refer to either men or women.
TC 90-1 ·Army ·1993 Training for Military Ops on Urban Terrain
This manual provides guidance for leaders who train soldiers for military operations on urbanized terrain (MOUT). Leaders plan and conduct training so they can prepare soldiers to survive and win in urban combat. This training must follow…
TI 850-02 ·Army ·2000