TM 10-1670 ·Army ·1971 Operator's Manual: Parachute, Personnel (28-Ft Back, 28-Ft Chest, NB-8 Back, Martin-Baker Ejection Seat Harnesses)
TM 10-1670-213-10 a. The Parachute Canopy. The parachute canopy (figs. 1-6 and 1-7) is made of 1.1 ounce ripstop nylon and has 14 continuous type III nylon canopy lines. The canopy lines run continuously from a connector link, through the…
TM 10-7200-200-13 ·Army ·1974 Organizational and Direct Support Maintenance Manual Including Repair Parts and Special Tool List: Can, Gasoline, Military; Steel; 5-Gallon; Can, Water, Military (Steel, Aluminum,
TM 10-7200-200-13 LIST OF ILLUSTRATIONS Number Page 2-1 2-2 2-3 2-4 3-1 4-1 5-1 6-1 6-2 6-3 6-4 6-5 6-6 Title Gasoline can, military, 5-gallon Cleaning the S-gallon can using the cleaning machine Flow diagram for improvised can cleaning…
TM 55-1279 ·Army ·1955 Locomotive, Diesel Electric, 56-1/2 Inch Gage, 44 Ton, 0-4-4-0, 400 HP, Davenport Besler
CHAPTER 2 OPERATING INSTRUCTIONS Section I. SERVICE UPON RECEIPT OF LOCOMOTIVE 6. Electrical Equipment a. Lubricate all bearings, gears and other parts of the motors, generators and control equipment (fig. 5). Inspect all bolts and nuts…
TM 55-203 ·Army ·1972 Maintenance of Railway Cars
1-1. Purpose and Scope a. This manual provides information and guidance to personnel concerned with the operation, inspection, and maintenance of Department of the Army-owned continental United States railway intraplant freight equipment,…
TM 55-2200-001-12 ·Army ·1978 Transportability Guidance: Application of Blocking, Bracing, and Tiedown Materials for Rail Transport
2-1. General a. The Association of American Railroads loading rules are formulated to provide safe and economical methods of loading railcars. The materials specified in these rules are the minimum required, based on many years of exacting…
TM 750-136 ·Army ·1969 Proc. for Rapid Deployment, Redeployment, & Retrograde Small Arms
TM 750-136 CHAPTER 2 PREPARATION INSTRUCTIONS FOR SHIPMENT: SURFACE VESSEL TRANSPORT 2-1. General a. This chapter provides instructions for preservation, packaging, packing and deprocessing as it applies to rapid deployment, redeployment,…
TM 9-1000-202-35 ·Army ·1959 Operating Procedures Evaluation of Cannon Tubes
I. Scope a. The scope of this series of manuals, as listed in b below, is to cover the latest informa tion and instructions for judging cannon tubes for the guidance of ordnance personnel con cerned with cannon tube inspection and calibra…
TM 9-1300-200 ·Army ·1969 Ammunition, General
TM 9-1300-200 (3) Form (fixed, semifixed, separated, or separate loading). (4) Kind of filler (explosive, chemical, leaflet, or inert). b. For purposes of handling and storage, ammunition is identified by the following: (1)…
TM 9-1300-204 ·Army ·1959 Ammunition for Recoilless Rifles
for 106-mm rifles and for caliber .50 spotting rifles. (2) Adds information on: (a) Fuze PIBD M509. (6) New ammunition items and components. (c) Fuze wrench M27. (3) Revises data, descriptions, and illustrations to bring the information up…
TM 9-1300-205 ·Army ·1960 Ammunition for Mortars
I. Purpose This manual is intended for instruction and the dissemination of such general and tech nical information concerning mortar ammuni tion and components thereof, as may be nec essary for care, handling, and use. This is a companion…
TM 9-207 ·Army ·1959 Operation and Maintenance of Ordnance Materiel i
C 1, TM 9-207/TO 36-1-40 and its alloys (except lead-tin compositions high taken in handling cables at low temperatures. If in tin) have the same capacity to withstand stress the rubber jackets become hard, the cables must as they possess…
TM 9-214 ·Army ·1959 Inspection, Care and Maintenance of Antifriction
Section 1 INTRODUCTION 1. Scope a. The purpose of this manual is to provide instructions for procedures in the inspection, care, and maintenance of antifriction bearings, which are identified under Federal Supply Classification Group 31 of…
TM 9-2330-294-14 ·Army ·1976 Operator's, Organizational, Direct Support and General Support Maintenance Manual: Semitrailer, Low-Bed Heavy Equipment Transporter, 60 Ton, M747
When stenciling, avoid excessive inhalation of vapors. All cleaning and stenciling procedures must be performed in well-ventilated room or outdoors. A C02 fire extinguisher must be positioned adjacent to the area where cleaning and…
TM 9-2350-300-10 ·Army ·1976 Operator's Manual (Crew) for Gun, Air Defense Artillery, Self-Propelled, 20 mm, M163
Section I. GENERAL 1-1. This manual provides crew operating and maintenance instructions for the M163, self-propelled Vulcan system. Use it to maintain your proficiency, and keep your M163 in peak condition. A look at the table of contents…
TM 9-2350-304-10 ·Army ·1979 f1-TM-9-2350-304-10
TM 9-2350-304-rc FIRE CONTROL ALINEMENT TEST AND MEASUREMENTS Fire control alinement tests (pages 2-70 thru 2-91 ) are performed by the section crew memOeri ,nO"i tfre supervision oi t-he battery executive office, chief of firing battery,…
TM 9-237-1 ·Army ·1960 Materials Used for Brazing, Welding, Soldering
1. Scope a. This manual is published for the use of personnel who require a general knowledge of the materials used in brazing, welding, soldering, arc cutting, or metallizing operations. This manual, however, does not provide data…
TM 9-238 ·Army ·1961 Deepwater Fording of Ordnance Materiel
Section I. GENERAL 1. Scope a. This manual contains general information in preparation of Ordnance materiel for deepwater fording operations. b. This general information covers overall instructions for guidance in connection with the…
TM 9-242 ·Army ·1959 Fundamentals of Ordnance Corps Machine Tools
Section I. GENERAL 1. Purpose and Scope This manual is published to provide ordnance personnel with a ready reference of principles, applications, and standard tabular data pertinent to power-driven machine tools in the Ordnance Corps…
TM 9-247 ·Army ·1940 Materials Used for Cleaning, Preserving, Abrading, and Cementing Ordnance Materiel; and Related Materials Including Chemicals
1. Scope a. This manual is intended for the use of personnel whose duties require a general knowledge of the materials employed in cleaning, preserving, abrading, cementing, and sealing of Ordnance materiel. It contains information…
TM 9-273 ·Army ·1962