TM 43-0001-36 U AR 102194 Type Classification: S 37119 (LCC-A) Use: Antitank mine M15 is intended for use against heavy tanks and other types of heavy tracked and wheeled vehicles. Description: The mine is a flat, steel cylinder with the…Archive131 pagesSustainment
This manual is a reference handbook published as an aid in planning, training, and identification of military pyrotechnics. It is not to be used as authorization for requisitioning, stockage, or issue of this materiel. 1-2. SCOPE a. For…Archive101 pagesSustainment
1-1. Purpose a. This manual is a reference handbook published as an aid in planning, training, and identification of Cartridges/Cartridge Actuated Devices (CADS) and Propellant Actuated Devices (PADs). It is not to be used as authorization…Archive238 pagesSustainment
TM 43-0001-47 APE 1001M1-–MACHINE, VERTICAL PULL APART (WITH 1001E091 DELUGE WITH SHIELD) Use: The vertical pull apart machine is a semiautomatic multipurpose machine used for processing 37MM through 106MM fixed artillery ammunition, Navy…Archive648 pagesSustainment
The information/instruction contained herein are for general use. If a conf lict exists 1-2. This is one of a series of technical or engibetween this technical manual and the specific neering technical manuals prepared to assist…Archive295 pagesSustainment
The following are general safety precautions that are not related to any specific procedures and therefore do not appear elsewhere in this publication. These are recommended precautions that personnel must understand and apply during many…Archive213 pagesSustainment
CHAPTER 2 OPERATING INSTRUCTIONS Section I. SERVICE UPON RECEIPT OF LOCOMOTIVE 6. Electrical Equipment a. Lubricate all bearings, gears and other parts of the motors, generators and control equipment (fig. 5). Inspect all bolts and nuts…Historic90 pagesSustainment
Remove and insert pages as indicated below. New or changed text is indicated by a vertical bar in the margin. An illustration change is indicated by a miniature pointing hand.Archive149 pagesSustainment
1-1. Purpose and Scope a. This manual provides information and guidance to personnel concerned with the operation, inspection, and maintenance of Department of the Army-owned continental United States railway intraplant freight equipment,…Historic256 pagesSustainment
2-1. General a. The Association of American Railroads loading rules are formulated to provide safe and economical methods of loading railcars. The materials specified in these rules are the minimum required, based on many years of exacting…Historic521 pagesSustainment
Section I. GENERAL INFORMATION 1-1. SCOPE MODEL NUMBER AND NAME: RS-4-TC-1A, 60-ton diesel-electric locomotive. PURPOSE OF EQUIPMENT: Used for yard switching. Can be used as a single unit or connected in multiple unit operation under one…Archive268 pagesSustainment
Section I. GENERAL INFORMATION 1-1. SCOPE MODEL NUMBER AND NAME: B-B-160/160-4GE747-A1, 80-ton diesel-electric locomotive. PURPOSE OF EQUIPMENT: Used for yard switching or short line railway service. Can be used as a single unit or…Archive274 pagesSustainment
Section I. GENERAL INFORMATION 1-1. SCOPE MODEL NUMBER AND NAME: B-B-160/160-4GE747-A1, 80-ton diesel-electric locomotive. PURPOSE OF EQUIPMENT: Used for general yard switching or short-line railway service. Can be used as a single unit or…Archive419 pagesSustainment
TM 55-2220-058-14 CHAPTER 2 TRANSPORTABILITY DATA 2-1 Scope This chapter contains the description, characteristics, and other data pertaining to the 68-foot, 140ton, chain-tiedown DODX flatcar, which will be referred to throughout this…Archive75 pagesSustainment
TM 750-136 CHAPTER 2 PREPARATION INSTRUCTIONS FOR SHIPMENT: SURFACE VESSEL TRANSPORT 2-1. General a. This chapter provides instructions for preservation, packaging, packing and deprocessing as it applies to rapid deployment, redeployment,…Historic204 pagesSustainment
I. Scope a. The scope of this series of manuals, as listed in b below, is to cover the latest informa tion and instructions for judging cannon tubes for the guidance of ordnance personnel con cerned with cannon tube inspection and calibra…Historic87 pagesSustainment
1-1. Purpose. This manual is intended for use as a text for instruction or as a reference source in the field of energetic materials. Only the materials of interest in conventional armaments are covered; nuclear armaments are not. 1-2.…Archive355 pagesSustainment
TM 9-1300-200 (3) Form (fixed, semifixed, separated, or separate loading). (4) Kind of filler (explosive, chemical, leaflet, or inert). b. For purposes of handling and storage, ammunition is identified by the following: (1)…Historic243 pagesSustainment
for 106-mm rifles and for caliber .50 spotting rifles. (2) Adds information on: (a) Fuze PIBD M509. (6) New ammunition items and components. (c) Fuze wrench M27. (3) Revises data, descriptions, and illustrations to bring the information up…Historic52 pagesSustainment
I. Purpose This manual is intended for instruction and the dissemination of such general and tech nical information concerning mortar ammuni tion and components thereof, as may be nec essary for care, handling, and use. This is a companion…Historic110 pagesSustainment
1-1. Purpose. This manual is intended for use as a text for instruction or as a reference source in the field of energetic materials. Only the materials of interest in conventional armaments are covered; nuclear armaments are not. 1-2.…Archive355 pagesSustainment
This user manual provides ready references to sources of information, regulations, and technical experts for the purpose of 'ensuring that demilitarization/disposal activities utilize and implement the latest gUidance and technical…Archive166 pagesSustainment
Section I. GENERAL 1-1. Scope a. This is one of a series of manuals on maintenance of small arms ammunition. (Federal Supply Class 1305 which includes ammunition through 30 millimeter.) Information in this manual is limited to the…Archive75 pagesSustainment
Unit maintenance manual for military pyrotechnics: maintenance, inspection, and handling of pyrotechnic signals and simulators (1995).Archive53 pagesSustainment
Destruction of military Pyrotechnics, when subject to capture or abandonment, will be undertaken by the user only when in the judgment of the unit commander concerned such action is necessary in accordance with orders or policy established…Archive67 pagesSustainment
C 1, TM 9-207/TO 36-1-40 and its alloys (except lead-tin compositions high taken in handling cables at low temperatures. If in tin) have the same capacity to withstand stress the rubber jackets become hard, the cables must as they possess…Historic144 pagesSustainment
Section 1 INTRODUCTION 1. Scope a. The purpose of this manual is to provide instructions for procedures in the inspection, care, and maintenance of antifriction bearings, which are identified under Federal Supply Classification Group 31 of…Historic85 pagesSustainment
The following abbreviations are found Abbreviation Explanation in the lists: OO Abbreviation Explanation a weoad u/w used with assy assembly w/ with pl jouble wo/ without dia diameter ea each d. Authorization documents are as follows: ft…Archive31 pagesSustainment
Exposure to exhaust gases produces symptoms of headache, dizziness, loss of muscular control, apparent drowsiness, and coma. Permanent brain damage or death can result from severe exposure. Carbon monoxide occurs in the exhaust fumes of…Archive71 pagesSustainment
This volume tells you how to do troubleshooting at the operator's level of maintenance. The amount of troubleshooting you can do is based on what the Maintenance Allocation Chart says you can fix. Because of this, the only trouble symptoms…Archive111 pagesSustainment
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.