This FM is a guide for military occupational specialty (MOS) 82D (Topographic Surveyor). It provides techniques not found in any commercial text concerning the precise determination of position, azimuth, or elevation of a point.…ArchiveEngineering
FM 5-105 special-purpose topographic products tailored to meet the supported commander's needs. These units belong to the topographic battalion in the theater of operations, but maintain a habitual relationship with their supported…Archive56 pagesEngineering
Influence of the operational environment on . reconnaissance Intelligence aspects of reconnaissance Reconnaissance operations RECONNAISSANCE AND CLASSIFICA- TION OF EXISTING ROUTES Route classification Route reconnaissance overlays Slope…Historic282 pagesEngineering
Field Manual (FM) 3-37 provides doctrinal guidance for commanders and staffs who are responsible for planning and executing protection in support of full spectrum operations. It describes protection as both an element of combat power and…Archive134 pagesEngineering
Protection is the preservation of the effectiveness and survivability of mission-related military and nonmilitary personnel, equipment, facilities, information, and infrastructure deployed or located within or outside the boundaries of a…Current146 pagesEngineering
ADRP 3-37 is a new publication that expands on the protection principles found in ADP 3-37. The doctrine described in this publication is nested within ADRP 3-0 and describes protection as a continuing activity and a warfighting function.…Archive72 pagesEngineering
1. Scope This multiservice tactics, techniques, and procedures (MTTP) manual provides guidance and procedures for the employment of an explosive ordnance disposal (EOD) force when operating in a joint capacity throughout the range of…Archive101 pagesEngineering
1. Scope This multiservice tactics, techniques, and procedures (MTTP) manual provides guidance and procedures for the employment of an explosive ordnance disposal (EOD) force when operating in a joint capacity throughout the range of…Archive101 pagesEngineering
Field Manual (FM) 5-170 describes how engineer recon teams support and augment a maneuver battalion or brigade's recon effort. It is designed as an engineer extension of FMs 17-95 and 17-98. This manual serves as a guide for both brigade…Archive253 pagesEngineering
This special conversion does not integrate any changes in Army doctrine since December 1972 and does not alter the publication's original references; therefore, some sources cited in this TM may no longer be current. For the status of…Archive448 pagesEngineering
1 T H E U X O H A Z A R D There were 21 US Army personnel killed and 53 injured during Operation Desert Storm as a direct result of handling UXO. Every person on the battlefield must be able to recognize and react to these hazards.…Archive122 pagesEngineering
By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected…Archive162 pagesEngineering
By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected…Archive414 pagesEngineering
Today more than ever before, the engineer plays a critical role as a member of the combined arms team. As movement and lethality on the battlefield increase, the requirement to reinforce the terrain increases. The engineer brings to the…Historic376 pagesNewer: 1996Engineering
Demolitions are primarily used for the rapid creation of obstacles, the reduction of enemy obstacles, and construction blasting. The primary advantages are the limited logistical support requirements and the short time and small crews…Historic464 pagesNewer: 1999Engineering
This special conversion does not integrate any changes in Army doctrine since 4 January 1985 and does not alter the publication's original references; therefore, some sources cited in this TM may no longer be current. For the status of…Archive314 pagesEngineering
26 November 2010 ATTP 3-34.39/MCRP 3-17.6A 1-1 Chapter 1 Basics CCD is the use of materials and techniques to hide, blend, disguise, decoy, or disrupt the appearance of military targets and/or their backgrounds. CCD helps prevent an enemy…Archive88 pagesEngineering
PRELIMINARY PLANNING FM 5-430-00-2/AFJPAM 32-8013, Vol II CHAPTER Successful construction of an airfield or heliport requires careful planning accomplished as early as possible. Planning includes– Mission assignment. Collection of planning…Archive537 pagesEngineering
PRELIMINARY PLANNING FM 5-430-00-2/AFJPAM 32-8013, Vol II CHAPTER Successful construction of an airfield or heliport requires careful planning accomplished as early as possible. Planning includes– Mission assignment. Collection of planning…Archive539 pagesEngineering
TM 5-823-4 CHAPTER 1 GENERAL 1-1. Purpose. Runway and taxiway markings are essential for the safe and efficient use of airfields and heliports, and their effectiveness is dependent upon proper markings and maintenance to maintain an…Archive42 pagesEngineering
16 June 2023 ATP 3-34.84/MCRP 3-10.2/NTTP 3-07.7/ i AFTTP 3-2.75/CGTTP 3-95.17 PREFACE 1. Purpose This multi-Service tactics, techniques, and procedures (MTTP) publication for Military Diving is a single source, descriptive reference guide…Current96 pagesEngineering
The United States. Army Engineer School developed this publication with the joint participation of the approving Service commands. The design of new structures and facilities is based on the results obtained from the methods and procedures…Current416 pagesEngineering
and scope. This manual establishes criteria for guidance of Corps of Engineers personnel in the planning and design of proposed military ports. It includes site selection and evaluation, layout of harbor facilities, coastal protection…Archive146 pagesEngineering
This multi-Service tactics, techniques, and procedures (MTTP) publication is a project of the Air Land Sea Application (ALSA) Center in accordance with the memorandum of agreement between the Headquarters of the Army, Navy, Air Force, and…Archive82 pagesEngineering
1. Purpose This manual describes the topographic symbols and abbreviations authorized for use by all echelons in the interpretation of military maps, overlays, and related features and activities. 2. Scope This manual is divided into four…Archive95 pagesEngineering
C H A P T E R 1 0 FLOATING WHARVES Both the US Army and Navy have floating equipment suitable for constructing floating wharves. The most promising equipment of each service is discussed below. Section I. Army Equipment (Current TO&E) The…Archive77 pagesNewer: 1990Engineering
This field manual (FM) describes doctrine for topographic operations in support of the United States (US) Army's strategic, operational, and tactical missions. The Army's strategic challenge is to prepare for the rise of a major military…Archive157 pagesEngineering
1. Purpose This manual is a guide for individual soldiers, commanders and their staffs at all levels, and special engineer intelligence units concerned with responsibility and procedures for the production and dissemination of engineer…Historic130 pagesNewer: 1985Engineering
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.