TM 5-692-1 ·Army ·2005 Maintenance of Mechanical and Electrical Equipment at Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR) Facilities: Recommended Mai
This document provides generic guidance to agencies responsible for the development and implementation of maintenance programs for site utility systems at Command, Control, Communications, Computers, Intelligence, Surveillance, and…
TM 5-692-2 ·Army ·2005 Maintenance of Mechanical and Electrical Equipment at Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR) Facilities: System Design F
This document has been prepared to provide generic guidance to agencies responsible for the development and implementation of maintenance programs for site utility systems at command, control, communications, computers, intelligence,…
TM 5-693 ·Army ·2002 Uninterruptible Power Supply System Selection, Installation, and Maintenance for Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR)
The purpose of this publication is to provide guidance for facilities engineers in selecting, installing, and maintaining an uninterruptible power supply (UPS) system after the decision has been made to install it. This technical manual…
TM 5-694 ·Army ·2006 Commissioning of Electrical Systems for Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR) Facilities
The purpose of this publication is to provide guidance to engineering managers/planners for the commissioning of electrical systems at command, control, communications, computer, intelligence, surveillance, and reconnaissance (C4ISR)…
TM 5-697 ·Army ·2006 Commissioning of Mechanical Systems for Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR) Facilities
The purpose of mechanical systems commissioning is to increase the reliability of mechanical power systems after installation by identifying problems and providing a set of baseline values for comparison with subsequent routine tests. A…
TM 5-698-1 ·Army ·2007 Reliability/Availability of Electrical & Mechanical Systems for Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR) Facilities
The purpose of this technical manual is to provide facility managers with the information and procedures necessary to baseline the reliability and availability of their facilities, identify "weak links", and to provide guidance toward…
TM 5-698-2 ·Army ·2006 Reliability-Centered Maintenance (RCM) for Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR) Facilities
The purpose of this technical manual is provide facility managers with the information and procedures necessary to develop and update a preventive maintenance (PM) program for their facilities that is based on the reliability…
TM 5-698-4 ·Army ·2006 Failure Modes, Effects and Criticality Analysis (FMECA) for Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR) Facilities
The purpose of this manual is to guide facility managers through the Failure Mode, Effects and Criticality Analysis (FMECA) process, directing them how to apply this type of analysis to a command, control, communications, computer,…
TM 5-800-4 ·Army ·1994 Programming Cost Estimates for Military Construction
Purpose. prepared, and they include the cost of installed building This manual establishes criteria and standards for development and preparation of programming cost estimates for constructing military facilities. 2. Scope. This manual…
TM 5-803-1 ·Army ·1986 Installation Master Planning
1-1. Purpose Master planning is a continuous analytical process which involves evaluation of factors affecting the present and future physical development of an installation. This evaluation forms the basis for determination of development…
TM 5-803-13 ·Army ·1988 Landscape Design and Planting
1-1. Purpose. This manual provides planting design techniques and methods for the successful establishment guidelines for preserving. and improving the quality of of plants. Factors which are critical in the selection of the visual…
TM 5-803-5 ·Army ·1981 Installation Design
Introduction. 1-1. Purpose of the Manual. A. Introduction. Military installations should provide efficient and pleasant physical environments conducive to attracting and retaining skilled and motivated personnel. A military installation…
TM 5-809-1 ·Army ·1992 Structural Design Criteria Loads
TM 5-809-1/AFM 88-3, Chap. 1 CHAPTER 1 GENERAL 1-1. Purpose This manual provides the structural criteria for loads to bc used in the design and construction of buildings and other structures for the Army and the Air Force. 1-2. Scope Load…
TM 5-811-1 ·Army ·1995 Electrical Power Supply and Distribution
TM 5-811-1/AFJMAN 32-1080 CHAPTER 1 GENERAL 1-1. Purpose. This manual provides Department of the Army and Air Force policy and guidance for design criteria and standards for electrical power supply and distribution systems. 1-2. Scope. The…
TM 5-811-3 ·Army ·1985 Electrical Design: Lightning and Static Electricity Protection
TM 5-811–3/AFM 88–9, Chap. 3 sate for the following conditions as encountered at corrosion. This must be prevented by use of same project locations: type metals, or by providing junctions of dissimilar (1) Corrosive soils and atmosphere.…
TM 5-811-6 ·Army ·1984 Electric Power Plant Design
1-1. Purpose a. General: This manual provides engineering data and criteria for designing electric power plants where the size and characteristics of the electric power load and the economics of the particular facilit y justify on-site…
TM 5-811-7 ·Army ·1985 Electrical Design, Cathodic Protection
Purpose. one small section of a pipeline may be anodic This manual presents design guidance for cathodic protection systems. 1-2. References. a. Government publications. flows because of a potential difference between the Department of…
TM 5-813-1 ·Army ·1987 Water Supply Sources and General Considerations
All construction (structures, pipe, equipment) required for the collection, transportation, pumping, treatment, storage and distribution of water. (2) Supply works. Dams, impounding reservoirs, intake structures, pumping stations, wells…
TM 5-813-3 ·Army ·1985 Water Supply, Water Treatment
TM 5-813-3/AFM 88-10, Vol 3 CHAPTER 1 GENERAL 1-1. Purpose and scope. This manual, intended for planners and design engineers, presents information on water quality standards and design criteria for water treatment processes. This manual…
TM 5-813-5 ·Army ·1986 Water Supply, Water Distribution
TM 5-813-5/AFM 88-10, Vol. 5 CHAPTER 1 GENERAL 1-1. Purpose and scope. This manual provides criteria for design and construction of potable water distribution systems for fixed military installations. Within the context of this manual, a…
TM 5-813-8 ·Army ·1986 Water Desalination
TM 5-813-8 CHAPTER 1 GENERAL 1-1. Purpose. This manual describes the guidelines to be followed in selecting a process capable of producing potable water supplies from brackish and sea water sources. Potable water is defined in TB MED 576.…
TM 5-814-1 ·Army ·1985 Sanitary and Industrial Wastewater Collection: Gravity Sewers and Appurtenances
ARMY TM 5-814-1 AIR FORCE AFM 88-11, Volume 1 SANITARY AND INDUSTRIAL WASTEWATER COLLECTION- GRAVITY SEWERS AND APPURTENANCES DEPARTMENTS OF THE ARMY, AND THE AIR FORCE MARCH 1985 TM5-814-1/AFM88-11,Volume1 REPRODUCTION…
TM 5-814-2 ·Army ·1985 Sanitary and Industrial Wastewater Collection: Pumping Stations and Force Mains
and lifting of raw wastewater into the waste treatment plant, (3) transfer of recycled and bypassed flows throughout the plant, and (4) discharge of treated effluent. Pumping systems for the handling of sludge, grit and scum are presented…
TM 5-814-3 ·Army ·1988 Domestic Wastewater Treatment
TM 5-814-3/AFM 88-11, Volume III v LIST OF FIGURES (cont'd) Figure 10-3. Plan and cross-sectional views of a comminutor installation. 10-4. Typical comminutor performance. 10-5. Power required for flocculation. 11-1. Effective surface area…
TM 5-814-5 ·Army ·1994 Sanitary Landfill
Purpose. or subsurface aquifers or otherwise harm the This manual establishes the minimum design requirements for sanitary landfills, provides engineering criteria for construction, and lists recommended practices for planning and…
TM 5-814-7 ·Army ·1984 Hazardous Waste Land Disposal/Land Treatment Facilities
1-1. Purpose The purpose of TM 5-814-7 is to establish Army design criteria that comply with the national goal of ground-water protection. On the Federal level, subtitle C of the Resource Conservation and Recovery Act (RCRA) of 1976 (42…
TM 5-814-8 ·Army ·1987 Evaluation Criteria Guide for Water Pollution Prevention, Control, and Abatement Programs
Corps of Engineers technical manual of evaluation criteria for water pollution prevention, control, and abatement programs at Army facilities (1987).
TM 5-818-1 ·Army ·1983 Soils and Geology Procedures for Foundation Design of Buildings and Other Structures (Except Hydraulic Structures)
1-1. Purpose. This manual presents guidance for selecting and designing foundations and associated features for buildings, retaining structures, and machinery. Foundations for hydraulic structures are not included. Foundation design…
TM 5-818-4 ·Army ·1983 Backfill for Subsurface Structures
1-1. Background. Military facilities for the Army and Air Force have included construction of buildings and other structures partially below ground surface. In more recent years, missile launching and support structures, fallout and…
TM 5-818-5 ·Army ·1983