TM 5-809-1: Structural Design Criteria Loads | T.REX ARMS Field Manual Vault

TM 5-809-1 Structural Design Criteria Loads

TM 5-809-1

Structural Design Criteria Loads

Army · TM · May 1992 · 97 pages

About

TM 5-809-1/AFM 88-3, Chap. 1 CHAPTER 1 GENERAL 1-1. Purpose This manual provides the structural criteria for loads to bc used in the design and construction of buildings and other structures for the Army and the Air Force. 1-2. Scope Load criteria presented in this manual apply to designs for new military construction and for modifications of existing buildings and other structures for the Army and the Air Force. Engineering judgment must be used in calculating design loads. The dead loads specified herein are for guidance only. The designer must detcrmine and allow for the actual dead loads in the structure. The live, wind, and snow loadings specified herein are minimums. The desig- ner should determine if special loadings must be considered. 1-3. References Appendix A contains a list of references used in this docu- ment. 1-4.

DesignationTM 5-809-1

EditionMay 1992

StatusSuperseded

Pages97

FunctionEngineering

CollectionRecent Archive

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNUMITED 'This manual SupsrssdesTM 5-809.

References 13

TM 5-809Not in the Vault
TM 5-818Not in the Vault
TM 5-858Not in the Vault
TM 5-809-10Not in the Vault
TM 5Not in the Vault
TM 5-855-1Not in the Vault
TM 5-809-31Not in the Vault
TM 5-809-101Not in the Vault
TM 5-809-10-11Not in the Vault
TM 5-818-11Not in the Vault
TM 5-13001Not in the Vault