TM 9-1005-224 ·Army ·1965 Organizational Maintenance Manual: Machine Gun, 7.62 mm, M60 and Mount, Tripod, Machine Gun, M122
Section Il. OPERATION @ 2-3. Blank Ammunition Firing Attachment M13 The blank ammunition firing attachment is used only during training. It is listed in appendix B and requisitioned for instructional purposes. When attached to the weapon…
TM 9-1005-262-14 ·Army ·1973 Operator, Organizational, DS, and GS Maintenance Manual: Helicopter 7.62 mm Machine Gun Subsystems M23, M24, M41
Section GENERAL 1-1. Scope. millimeter machine gun helicopter' armament a. This manual contains information and in- subsystems M23 (fig 1-1), M24 (fig 1-2), and M41 structions for operation and maintenance of 7.62 (fig 1-3). WE 10700A,…
TM 9-1005-262-15 ·Army ·1965 Operator Through Depot Maintenance Manual: Helicopter 7.62 mm Machine Gun Subsystems XM23 and XM24
Provides operation and maintenance information and instructions for the 7.62mm door-mounted lightweight machine gun helicopter armament subsystems XM23 (used on UH-1D helicopters) and XM24 (used on CH-47A helicopters), including the XM60D…
TM 9-1005-262-24P ·Army ·1971 Repair Parts and Special Tools Lists: Armament Subsystem, Helicopter, 7.62 mm Machine Gun, M23, M24, and M41
Code Explanation G Major assemblies that are procured with PEMA funds for initial issue only as exchange assemblies at DSU and GSU level, will not be stocked above DS and GS level or returned to depot supply level. (2) Maintenance Code.…
TM 9-1005-286-10 ·Army ·1976 Operator's Manual (Crew) for Gun, Air Defense Artillery, Towed, 20 mm, M167A1
Operator's (crew) manual for the towed 20mm air defense artillery gun M167A1, covering operation of the M168 cannon, AN/VPS-2 radar set, and associated ammunition and equipment.
TM 9-1015-200-20 ·Army ·1971 Organizational Maintenance Manual (Including Repair Parts and Special Tools Lists) for 81 mm Mortar, M29A1
TM 9-1015-200-20&P 1-8. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. A CANNON ASSEMBLY. The barrel is an externally threaded tube, closed at one end by a base cap that locks into the socket cap of baseplate. The cannon is used to fire…
TM 9-1015-200-30 ·Army ·1974 Direct Support Maintenance Manual (Including Repair Parts and Special Tools List) for 81 mm Mortar, M29A1
TM 9-1015-200-30&P 1-8. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. A CANNON ASSEMBLY. The barrel is an externally threaded tube, closed at one end by a base cap that locks into the socket cap of baseplate. The cannon is used to fire…
TM 9-1290-333-15 ·Army ·1963 Compass, Magnetic, Unmounted: M2
TM 9-1300-200 ·Army ·1969 Ammunition, General
TM 9-1300-200 (3) Form (fixed, semifixed, separated, or separate loading). (4) Kind of filler (explosive, chemical, leaflet, or inert). b. For purposes of handling and storage, ammunition is identified by the following: (1)…
TM 9-1300-204 ·Army ·1959 Ammunition for Recoilless Rifles
for 106-mm rifles and for caliber .50 spotting rifles. (2) Adds information on: (a) Fuze PIBD M509. (6) New ammunition items and components. (c) Fuze wrench M27. (3) Revises data, descriptions, and illustrations to bring the information up…
TM 9-1300-205 ·Army ·1960 Ammunition for Mortars
I. Purpose This manual is intended for instruction and the dissemination of such general and tech nical information concerning mortar ammuni tion and components thereof, as may be nec essary for care, handling, and use. This is a companion…
TM 9-1330-200-12 ·Army ·1971 Operator's and Organizational Maintenance Manual for Grenades
Section I. GENERAL 1-1. Scope Information in this manual is limited to responsibilities of operator and organizational support maintenance personnel (i.e., maintenance not beyond the scope of the tools, equipment or supplies normally…
TM 9-1375-213-12 ·Army ·1973 Operator's and Organizational Maintenance Manual: Demolition Materials
WARNING Composition C2, C3, and C4 explosives are poisonous and dangerous if chewed or ingested. Their detonation or burning produces poisonous fumes-do not use as a heat source.
TM 9-207 ·Army ·1959 Operation and Maintenance of Ordnance Materiel i
C 1, TM 9-207/TO 36-1-40 and its alloys (except lead-tin compositions high taken in handling cables at low temperatures. If in tin) have the same capacity to withstand stress the rubber jackets become hard, the cables must as they possess…
TM 9-214 ·Army ·1959 Inspection, Care and Maintenance of Antifriction
Section 1 INTRODUCTION 1. Scope a. The purpose of this manual is to provide instructions for procedures in the inspection, care, and maintenance of antifriction bearings, which are identified under Federal Supply Classification Group 31 of…
TM 9-2330-294-14 ·Army ·1976 Operator's, Organizational, Direct Support and General Support Maintenance Manual: Semitrailer, Low-Bed Heavy Equipment Transporter, 60 Ton, M747
When stenciling, avoid excessive inhalation of vapors. All cleaning and stenciling procedures must be performed in well-ventilated room or outdoors. A C02 fire extinguisher must be positioned adjacent to the area where cleaning and…
TM 9-2350-300-10 ·Army ·1976 Operator's Manual (Crew) for Gun, Air Defense Artillery, Self-Propelled, 20 mm, M163
Section I. GENERAL 1-1. This manual provides crew operating and maintenance instructions for the M163, self-propelled Vulcan system. Use it to maintain your proficiency, and keep your M163 in peak condition. A look at the table of contents…
TM 9-2350-304-10 ·Army ·1979 f1-TM-9-2350-304-10
TM 9-2350-304-rc FIRE CONTROL ALINEMENT TEST AND MEASUREMENTS Fire control alinement tests (pages 2-70 thru 2-91 ) are performed by the section crew memOeri ,nO"i tfre supervision oi t-he battery executive office, chief of firing battery,…
TM 9-237-1 ·Army ·1960 Materials Used for Brazing, Welding, Soldering
1. Scope a. This manual is published for the use of personnel who require a general knowledge of the materials used in brazing, welding, soldering, arc cutting, or metallizing operations. This manual, however, does not provide data…
TM 9-238 ·Army ·1961 Deepwater Fording of Ordnance Materiel
Section I. GENERAL 1. Scope a. This manual contains general information in preparation of Ordnance materiel for deepwater fording operations. b. This general information covers overall instructions for guidance in connection with the…
TM 9-242 ·Army ·1959 Fundamentals of Ordnance Corps Machine Tools
Section I. GENERAL 1. Purpose and Scope This manual is published to provide ordnance personnel with a ready reference of principles, applications, and standard tabular data pertinent to power-driven machine tools in the Ordnance Corps…
TM 9-247 ·Army ·1940 Materials Used for Cleaning, Preserving, Abrading, and Cementing Ordnance Materiel; and Related Materials Including Chemicals
1. Scope a. This manual is intended for the use of personnel whose duties require a general knowledge of the materials employed in cleaning, preserving, abrading, cementing, and sealing of Ordnance materiel. It contains information…
TM 9-273 ·Army ·1962