FM 55-8 CHAPTER 2 SOURCES AND SCOPE OF TRANSPORTATION INTELLIGENCE * 1 L 2-1. Definitions and Employment of Intelligence a. Intelligence Intelligence is the product resulting from the collection, evaluation, analysis, integration, and…Historic136 pagesSustainment
1. Purpose and Scope a. This manual provides commanders and staff officers with general guidance for establishing and utilizing transportation service in the field army. It is designed to serve the following specific pur- poses: (1) To…Historic56 pagesSustainment
This is the first field manual to be prepared in accordance with the provisions of paragraph 2-13b(3) AR 310-2 which provides for numbering logistics field manuals in the 700 "logistic" series with a subseries to identify logistics levels…Historic68 pagesSustainment
Section 1. GENERAL 1. PURPOSE This manual is a guide for personnel concerned with the logistics of ordnance maintenance and general supply in the field. It deals with the organization, management, and operations of ordnance maintenance and…Historic282 pagesSustainment
Mission segregation area to truck.) See FM 9-5 for a a. Th(eordnance ammunition company is de- more detailed explanation of "lift." signed to establish and operate an ammunition b. Increased Capability. The lift capacity depot or one or…Historic51 pagesSustainment
semblies for return to supply channels. (Limited reconditioning restricts the extent to which an item may be disassembled and the quantity and type of replacement parts that may be utilized in the maintenance operation. It permits only…Historic68 pagesSustainment
ordnance support for both nuclear and nonnuclear combat. a. This manual provides statistical data and information for use primarily by ordnance staff c. Illustrative problems and solutions are proofficers. vided to demonstrate the…Historic125 pagesSustainment
34 ORDNANCE FIELD MANUAL 4 3. AssicNMENTS.—a. Ammunition companies are normally assigned to— (1) Ammunition battalions (six companies per battalion, two battalions per field army). (2) Air forces (one company per 500 tons of ammunition per…Historic261 pagesSustainment
FM 9-25 ORDNANCE FIELD MANUAL THE ORDNANCE COMPANY, DEPOT CHAPTER 1 DEFINITIONS * 1. DEFINITIONS.-a. Accountability.-See AR 35-6520. b. Audit.--An audit is an official examination and authentication of accounts, with vouchers, etc. The…Historic237 pagesSustainment
1. Purpose and Scope plex repairs. Therefore, the three basic ordnance tunctions must be performed at more than This manual is a guide for ordnance person- ne Epin e proed t reqr one level. Experience has proved the requirenel and other…Historic125 pagesSustainment
Organization and operation of ordnance units for the disposal of unexploded bombs, covering bomb disposal companies and squads, reconnaissance, and operating technique.Historic156 pagesSustainment
FM 9-47 1-3. Special Ammunition Supply System Characteristics Special ammunition service is unique or peculiar in the following major respects: a. It is national policy that very stringent controls be placed upon the use of special…Historic99 pagesSustainment
The success of ordnance service in the field is more dependent upon the efficiency of management than upon any other factor. The three basic elements of management are organization, planning, and control. In this manual, these basic…Historic162 pagesSustainment
FM 9-6 c l ORDNANCE FIELD MANUAL AMMUNITION SUPPLY CHANGES WAR DEPARTMENT, No. 1 WASHINGTON 25, D. C., 21 December 1944. FM 9-6, 15 June 1944, is changed as follows: 5. DEFINITIONS. Certain terms will * + * of this manual. When the term…Historic157 pagesSustainment
4. Definitions There is no section or glossary in this manual devoted to definitions of terms. The terms used throughout this manual may be found in AR 320-5, "Dictionary of United States Army Terms," except for those few not yet…Historic146 pagesSustainment
1. Purpose and Scope (c) Assisting direct support units in recovery and evacuation operations. a. This manual is a guide for the training and employment of the Ordnance General Sup- (2) The GS company provides limited report (GS) Company,…Historic79 pagesSustainment
THE SIMONOV SEMIAUTOMATIC CARBINE (SKS) General The Soviet-designed Simonov semiautomatic carbine (fig1 ), a gas-operated, integral box magazine-fed weapon equipped with a folding blade bayonet, is now obsolete in the Soviet Army, but is…Historic23 pagesSustainment
TM 10-1670-213-10 a. The Parachute Canopy. The parachute canopy (figs. 1-6 and 1-7) is made of 1.1 ounce ripstop nylon and has 14 continuous type III nylon canopy lines. The canopy lines run continuously from a connector link, through the…Historic38 pagesSustainment
TM 10-7200-200-13 LIST OF ILLUSTRATIONS Number Page 2-1 2-2 2-3 2-4 3-1 4-1 5-1 6-1 6-2 6-3 6-4 6-5 6-6 Title Gasoline can, military, 5-gallon Cleaning the S-gallon can using the cleaning machine Flow diagram for improvised can cleaning…Historic49 pagesSustainment
CHAPTER 2 OPERATING INSTRUCTIONS Section I. SERVICE UPON RECEIPT OF LOCOMOTIVE 6. Electrical Equipment a. Lubricate all bearings, gears and other parts of the motors, generators and control equipment (fig. 5). Inspect all bolts and nuts…Historic90 pagesSustainment
1-1. Purpose and Scope a. This manual provides information and guidance to personnel concerned with the operation, inspection, and maintenance of Department of the Army-owned continental United States railway intraplant freight equipment,…Historic256 pagesSustainment
2-1. General a. The Association of American Railroads loading rules are formulated to provide safe and economical methods of loading railcars. The materials specified in these rules are the minimum required, based on many years of exacting…Historic521 pagesSustainment
TM 750-136 CHAPTER 2 PREPARATION INSTRUCTIONS FOR SHIPMENT: SURFACE VESSEL TRANSPORT 2-1. General a. This chapter provides instructions for preservation, packaging, packing and deprocessing as it applies to rapid deployment, redeployment,…Historic204 pagesSustainment
I. Scope a. The scope of this series of manuals, as listed in b below, is to cover the latest informa tion and instructions for judging cannon tubes for the guidance of ordnance personnel con cerned with cannon tube inspection and calibra…Historic87 pagesSustainment
TM 9-1300-200 (3) Form (fixed, semifixed, separated, or separate loading). (4) Kind of filler (explosive, chemical, leaflet, or inert). b. For purposes of handling and storage, ammunition is identified by the following: (1)…Historic243 pagesSustainment
for 106-mm rifles and for caliber .50 spotting rifles. (2) Adds information on: (a) Fuze PIBD M509. (6) New ammunition items and components. (c) Fuze wrench M27. (3) Revises data, descriptions, and illustrations to bring the information up…Historic52 pagesSustainment
I. Purpose This manual is intended for instruction and the dissemination of such general and tech nical information concerning mortar ammuni tion and components thereof, as may be nec essary for care, handling, and use. This is a companion…Historic110 pagesSustainment
C 1, TM 9-207/TO 36-1-40 and its alloys (except lead-tin compositions high taken in handling cables at low temperatures. If in tin) have the same capacity to withstand stress the rubber jackets become hard, the cables must as they possess…Historic144 pagesSustainment
Section 1 INTRODUCTION 1. Scope a. The purpose of this manual is to provide instructions for procedures in the inspection, care, and maintenance of antifriction bearings, which are identified under Federal Supply Classification Group 31 of…Historic85 pagesSustainment
When stenciling, avoid excessive inhalation of vapors. All cleaning and stenciling procedures must be performed in well-ventilated room or outdoors. A C02 fire extinguisher must be positioned adjacent to the area where cleaning and…Historic293 pagesSustainment
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.