TM 8-628 ·Army ·1944 Instrument Sterilizer
tion and guidance nce of Sterilizer, 17005, in the field. nce of the equip— to in the instrucapter l—Introductenance and the nasmuch as pracare similar in design, to apply generally t, a-c-d-c is a gical instruments. electrically…
TM 8-629 ·Army ·1945 Field X-Ray Film Processing Equipment
Section I. GENERAL 1. SCOPE a. These instructions are published for the information and guid ance of the personnel to whom this equipment is assigned. They contain information on the operation and maintenance of the equip ment as well as…
TM 8-632 ·Army ·1945 X-Ray Field Unit, Machine, Chassis and Table
Section I. GENERAL 1. Scope a. These instructions are published for the information and guidance of all personnel to whom this equipment is assigned. They contain information on the operation and firstand second-echelon maintenance of the…
TM 8-633 ·Army ·1945 X-Ray Field Unit, Fluoroscopic, Foreign Body Localization, Complete
Section I. GENERAL I. Scope a. This manual is published for the information and guidance of the personnel to whom this equipment is assigned. It contains information on the operation and first and second echelon maintenance of the…
TM 8-638 ·Army ·1944 Engine, Handpiece, Straight; Engine, Handpiece, Angle
Illustrations concerning the various phases of operation and main- . tenance are included in the manual. Standard Nomenclature Lists for each item are appended. Section Il. DESCRIPTION 2. ENGINE, HANDPIECE, STRAIGHT. The Engine, Handpiece,…
TM 9-1000-202-35 ·Army ·1959 Operating Procedures Evaluation of Cannon Tubes
I. Scope a. The scope of this series of manuals, as listed in b below, is to cover the latest informa tion and instructions for judging cannon tubes for the guidance of ordnance personnel con cerned with cannon tube inspection and calibra…
TM 9-1005-206-12 ·Army ·1958 Operation and Organizational Maintenance
Ordnance technical manual: operator and organizational maintenance instructions in the small arms series (1958).
TM 9-1005-211-12 ·Army ·1968 Operator and Organizational Maintenance Manual: Pistol, Caliber .45, Automatic, M1911A1
Care must be exercised to either have the pistol raised or pointed down range when loading. Before firing, the firer must be sure that the bore of the pistol is free from any foreign matter. Firing a pistol with any obstruction in the bore…
TM 9-1005-211-35 ·Army ·1968 Direct Support, General Support, and Depot Maintenance Manual: Pistol, Caliber .45, Automatic, M1911A1
Before starting an inspection, be sure to clear the weapon. DO NOT actuate the trigger until the weapon has been cleared. Inspect the chamber, to insure that it is empty, and check to see that no ammunition is in position to be introduced…
TM 9-1005-213-10 ·Army ·1973 Operator's Manual for Machine Gun, Caliber .50, Browning, M2
1. Scope This appendix lists basic issue items and items troop installed or authorized required by the crew/operator for operation of the M2 machine
TM 9-1005-222-12P ·Army ·1961 Repair Parts and Special Tool Lists for Caliber .30 Rifle M1 (National Match)
2. Requisition Notes a. If the exact item requisitioned is not furnished, or if other action is necessary, the exact nature of the action taken by the supplying agency will be indicated by standard symbols on prescribed forms. b. When…
TM 9-1005-222-35 ·Army ·1966 Sniper Rifle Cal.30 M1 & M1D
Field and depot maintenance manual for the caliber .30 M1C and M1D sniper rifles: inspection, troubleshooting, repair, and repair standards (1966).
TM 9-1005-223-20 ·Army ·1967 Organizational Maintenance Manual: Rifles, 7.62 mm, M14 and M14A1, and Bipod, Rifle, M2
a ' A - WINTR WE 13991 Figure 1-7. 7.62-AfAf Afl4 winter trigger kit - right front view. b. Rifle M14A1 (fiffs. 1-8 and 1-9). The Rifle M14A1 is issued for the automatic rifle roll. Additional features are the folding shoul der rest, to…
TM 9-1005-224 ·Army ·1965 Organizational Maintenance Manual: Machine Gun, 7.62 mm, M60 and Mount, Tripod, Machine Gun, M122
Section Il. OPERATION @ 2-3. Blank Ammunition Firing Attachment M13 The blank ammunition firing attachment is used only during training. It is listed in appendix B and requisitioned for instructional purposes. When attached to the weapon…
TM 9-1005-262-14 ·Army ·1973 Operator, Organizational, DS, and GS Maintenance Manual: Helicopter 7.62 mm Machine Gun Subsystems M23, M24, M41
Section GENERAL 1-1. Scope. millimeter machine gun helicopter' armament a. This manual contains information and in- subsystems M23 (fig 1-1), M24 (fig 1-2), and M41 structions for operation and maintenance of 7.62 (fig 1-3). WE 10700A,…
TM 9-1005-262-15 ·Army ·1965 Operator Through Depot Maintenance Manual: Helicopter 7.62 mm Machine Gun Subsystems XM23 and XM24
Provides operation and maintenance information and instructions for the 7.62mm door-mounted lightweight machine gun helicopter armament subsystems XM23 (used on UH-1D helicopters) and XM24 (used on CH-47A helicopters), including the XM60D…
TM 9-1005-262-24P ·Army ·1971 Repair Parts and Special Tools Lists: Armament Subsystem, Helicopter, 7.62 mm Machine Gun, M23, M24, and M41
Code Explanation G Major assemblies that are procured with PEMA funds for initial issue only as exchange assemblies at DSU and GSU level, will not be stocked above DS and GS level or returned to depot supply level. (2) Maintenance Code.…
TM 9-1005-286-10 ·Army ·1976 Operator's Manual (Crew) for Gun, Air Defense Artillery, Towed, 20 mm, M167A1
Operator's (crew) manual for the towed 20mm air defense artillery gun M167A1, covering operation of the M168 cannon, AN/VPS-2 radar set, and associated ammunition and equipment.
TM 9-1015-200-20 ·Army ·1971 Organizational Maintenance Manual (Including Repair Parts and Special Tools Lists) for 81 mm Mortar, M29A1
TM 9-1015-200-20&P 1-8. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. A CANNON ASSEMBLY. The barrel is an externally threaded tube, closed at one end by a base cap that locks into the socket cap of baseplate. The cannon is used to fire…
TM 9-1015-200-30 ·Army ·1974 Direct Support Maintenance Manual (Including Repair Parts and Special Tools List) for 81 mm Mortar, M29A1
TM 9-1015-200-30&P 1-8. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. A CANNON ASSEMBLY. The barrel is an externally threaded tube, closed at one end by a base cap that locks into the socket cap of baseplate. The cannon is used to fire…
TM 9-1290-333-15 ·Army ·1963 Compass, Magnetic, Unmounted: M2
TM 9-1300-200 ·Army ·1969 Ammunition, General
TM 9-1300-200 (3) Form (fixed, semifixed, separated, or separate loading). (4) Kind of filler (explosive, chemical, leaflet, or inert). b. For purposes of handling and storage, ammunition is identified by the following: (1)…
TM 9-1300-204 ·Army ·1959 Ammunition for Recoilless Rifles
for 106-mm rifles and for caliber .50 spotting rifles. (2) Adds information on: (a) Fuze PIBD M509. (6) New ammunition items and components. (c) Fuze wrench M27. (3) Revises data, descriptions, and illustrations to bring the information up…
TM 9-1300-205 ·Army ·1960 Ammunition for Mortars
I. Purpose This manual is intended for instruction and the dissemination of such general and tech nical information concerning mortar ammuni tion and components thereof, as may be nec essary for care, handling, and use. This is a companion…
TM 9-1330-200-12 ·Army ·1971 Operator's and Organizational Maintenance Manual for Grenades
Section I. GENERAL 1-1. Scope Information in this manual is limited to responsibilities of operator and organizational support maintenance personnel (i.e., maintenance not beyond the scope of the tools, equipment or supplies normally…
TM 9-1375-213-12 ·Army ·1973 Operator's and Organizational Maintenance Manual: Demolition Materials
WARNING Composition C2, C3, and C4 explosives are poisonous and dangerous if chewed or ingested. Their detonation or burning produces poisonous fumes-do not use as a heat source.
TM 9-207 ·Army ·1959 Operation and Maintenance of Ordnance Materiel i
C 1, TM 9-207/TO 36-1-40 and its alloys (except lead-tin compositions high taken in handling cables at low temperatures. If in tin) have the same capacity to withstand stress the rubber jackets become hard, the cables must as they possess…
TM 9-214 ·Army ·1959 Inspection, Care and Maintenance of Antifriction
Section 1 INTRODUCTION 1. Scope a. The purpose of this manual is to provide instructions for procedures in the inspection, care, and maintenance of antifriction bearings, which are identified under Federal Supply Classification Group 31 of…
TM 9-2330-294-14 ·Army ·1976 Operator's, Organizational, Direct Support and General Support Maintenance Manual: Semitrailer, Low-Bed Heavy Equipment Transporter, 60 Ton, M747
When stenciling, avoid excessive inhalation of vapors. All cleaning and stenciling procedures must be performed in well-ventilated room or outdoors. A C02 fire extinguisher must be positioned adjacent to the area where cleaning and…
TM 9-2350-300-10 ·Army ·1976