Operator and organizational maintenance manual for Power Supplies PP-4763/GRC and PP-4763A/GRC, covering description, installation, operating instructions, and operator maintenance.Historic36 pagesComms Signal
Section GENERAL 1-1. Scope a. This manual describes Radio Repeater Set AN/TRC-138 (fig. 1-1 and 1-2) and covers the installation; operation; and operator, organizational, direct, and general support maintenance. NOTE The AN/TRC-138 is…Archive180 pagesComms Signal
This publication provides overprinted DA Forms 2062 (Hand Receipt) which list the contents of Components of End Items (COEI) and Additional Authorization List (AAL) items for Radio Sets AN/PRC-119A/D/F, AN/VRC87A/C/D/F, AN/VRC-88A/D/F,…Archive104 pagesComms Signal
to the SINCGARS ground ICOM opera- tor's manual. SINCGARS is designed for secure voice and data communication and is the only anti-jam radio that is part of a total system. SINCGARS is capable of two modes of operation: single channel and…Archive204 pagesComms Signal
Operator's pocket guide for SINCGARS ICOM ground radios (manpack and AN/VRC-87A through AN/VRC-92A vehicular sets), providing an operator roadmap, task flow charts, jamming/antijamming guidance, and a troubleshooting checklist.Archive30 pagesComms Signal
to the SINCGARS ground NON-ICOM operator's manual. SINCGARS is designed for secure voice and data communication and is the only anti-jam radio that is part of a total system. SINCGARS is capable of two modes of operation: single channel…Archive194 pagesComms Signal
To provide operators of SINCGARS manpack and vehicular radios with an easy to carry, quick reference guide to assist in task performance. Using this pocket guide, the operator should be able to perform without assistance all Primary…Archive93 pagesComms Signal
To provide Net Control Station (NCS) personnel with an easy to carry, quick reference guide to assist in task performance. Using this pocket guide, NCS personnel are expected to be proficient in the performance of all operator and NCS…Archive105 pagesComms Signal
TM 11-5820-890-10-8 b Change 1 WARNING LITHIUM NON-RECHARGEABLE BATTERIES Lithium Non-Rechargeable Batteries contain a great deal of energy. They must never be charged or abused. Attempting to do so could result in leakage, fire or even an…Archive353 pagesComms Signal
TM 11—5820—890-—20-2 A lithium-sulfur dioxide (Li-SO2) battery used with Battery Box, CY-8523A/PRC contains pressurized sulfur dioxide (SO2) gas. The gas is toxic, and the battery MUST NOT be abused in any way which may cause the battery…Archive452 pagesComms Signal
1. Scope This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for performance of unit, direct support, and general…Archive941 pagesComms Signal
The purpose of this statement is to identify safety features and precautionary procedures to be followed by personnel using Battery BA-5590/U. DESCRIPTION The BA-5590/U primary battery is a high-energy power source that contains lithium…Archive129 pagesComms Signal
(fig. 6-2) Receiver-Transmitter, Radio RT-348/ARC-54 receives and transmits frequency-modulated sig- nals in the frequency range of 30 to 69.95 mc. The receiver-transmitter unit is a combination double- conversion superheterodyne receiver…Historic454 pagesComms Signal
A monitor meter and a meter switch are located on the front panel for checking the receivertransmitter. A coaxial cable connects the REC. IF OUT connector to the REC. IF IN connector on the right side of the front panel. A coaxial cable…Historic48 pagesComms Signal
TM 11-5825-270-23P SECTION INTRODUCTION 1. Scope This manual lists spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE), and other special support equipment required for performance of…Archive23 pagesComms Signal
TM 11-5825-231-10 modulated (am) signal and the secondary console a frequency modulated (fm) signal. e. The primary and secondary consoles dif- fer physically in that different alternating current (ac) input panels are used and that the…Historic92 pagesComms Signal
Refer to the Table of Contents to find out where information can be found. The Table of Contents lists each chapter title and section heading.Archive239 pagesComms Signal
TM 11-5840-281-12-1 1-10. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. (CONT) AZIMUTH ANTENNA DRIVE ROTARY COUPLER SPEED REDUCER DRIVE MOTOR AZIMUTH ANTENNA DRIVE 305NE004 The azimuth antenna drive is attached to the elevation antenna…Archive344 pagesComms Signal
A3-1. Scope This appendix lists only basic issue items required by the crew/ operator for installation, operation, and maintenance of Signal Lamp Equipments SE-11 and SE-ll-A. IHistoric65 pagesComms Signal
Rotate the lock knobs of the boresight mount assembly forward (toward objective lens) until they come to a stop on the pins on the assembly. c. Slide the boresight mount assembly onto the guide rail of the M60 adapter assembly from the…Archive54 pagesMarksmanship Weapons
The image intensifier tube phosphor screens contain toxic materials. If a tube becomes broken, avoid inhalation of the phosphor screen material and do not allow it to come in contact with the mouth or open skin wounds.Archive55 pagesMarksmanship Weapons
Section I. 1-1. Scope a. This manual contains organizational and direct support (DS) maintenance instructions for Night Vision Sight AN/PVS-3 and AN/PVS-3A (night sights). It includes basic functioning of the night sight, troubleshooting,…Archive41 pagesMarksmanship Weapons
Hand receipt manual covering the end item/components of end item (COEI), basic issue items (BII), and additional authorization list (AAL) for Night Vision Sight, Crew Served Weapon AN/TVS-5, provided on a preprinted DA Form 2062 to aid…Archive10 pagesMarksmanship Weapons
Section I. GENERAL 1-1. Scope a. This manual describes Searchlight Set, Infrared AN/VSS-3 and covers its installation and operation, and operator and organizational maintenance. It includes operation under usual and unusual conditions,…Archive64 pagesMarksmanship Weapons
1-1. Scope a. This manual covers direct support, general support, and depot maintenance for Searchlight Set, Infrared AN/VSS-3. It includes instructions appropriate to direct support, general support, and depot maintenance for…Archive155 pagesMarksmanship Weapons
ble) that will be useful in identifying and controlling the item. Serial number to be inserted and initialed on all copies by the hand receipt holder. h. T 1(a). Quantity of each item as listed in the COEI, BII, and AAL. i. C 2(t). Leave…Archive9 pagesMarksmanship Weapons
2—1. General a. The TD-204/U or TD-754/G, TD-206/G, and TD-352/U are pulse-code modulation components used as part of multichannel communication systems. These systems use radio or cable, or combinations of both as transmission mediums.…Archive94 pagesComms Signal
1. Scope a. This manual covers field and depot main- tenance for Receiver, Radio R-943/USD-1 (fig. 1). It includes instructions appropriate to third, fourth, and fifth echelons for trouble- shooting, testing, aligning, and repairing the…Historic116 pagesComms Signal
WARNING HIGH VOLTAGE is used in this equipment. DEATH ON CONTACT MAY RESULT IF SAFETY PRECAUTIONS ARE NOT OBSERVED Maintenance adjustments of this equipment are made with power applied: Be careful when working near the interior of the…Archive254 pagesComms Signal