AFMAN24-204(I) 15 APRIL 2007 5 Chapter 1 GENERAL GUIDANCE 1.1. Applicability. Handlers, packers, inspectors, and preparers (certifiers) of hazardous materials shall comply with rules designed to maximize safety and security of the…Archive533 pagesSustainment
This item contains radioactive materiel. Control of this radioactive materiel is mandated by Federal law. Immediately report any suspected lost or damaged items to your Radiation Protection Officer. If your Radiation Protection Officer…Archive381 pagesFires
Page b, add the following WARNING: WARNING Hearing protection is required for the user and all adjacent personnel on firing range, when using M585 Cartridge. Page 2-20, add the WARNING, same as above. Page 4-1, add the WARNING, same as…Archive107 pagesFires
TM 11-5840-281-12-1 1-10. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. (CONT) AZIMUTH ANTENNA DRIVE ROTARY COUPLER SPEED REDUCER DRIVE MOTOR AZIMUTH ANTENNA DRIVE 305NE004 The azimuth antenna drive is attached to the elevation antenna…Archive344 pagesComms Signal
Read this manual carefully before handling, loading, or operating the pistol. Do not point pistol at personnel when loading, clearing, or firing as this could result in injury to, or death of, personnel. For safety considerations, the…Archive120 pagesMarksmanship Weapons
This list contains definitions of unusual words or terms used in this manual. WORD OR TERM ASCII Baudot Code Baud Rate Compatible AM. Continuous Wave (cw) Diversity Duplex (dx) Frequency Shift Keying (fsk) 850 Hz, Narrow Frequency Shift…Archive302 pagesComms Signal
1. Purpose and Scope. This manual provides commanders at Department of Defense installations with methods of accomplishing custodial services, establishes cleaning standards, and states passenger elevator operation procedures. It applies…Historic119 pagesEngineering
of Equipment. The Ancillary Equipment for Personnel Troop Parachute System provides a capability to safely deliver an airborne soldier, and individual equipment, from an aircraft in flight, for a vertical assault on an enemy.Archive441 pagesSustainment
PART ONE PERSONNEL, TRAINING, AND ACCOUNT MANAGEMENT Chapter 1 Personnel and Training GENERAL Food service leaders must be aware of their responsibilities, how to train their personnel, and how they can develop and manage a successful…Archive186 pagesSustainment
Waste management, regardless the number of deploying military and civilian personnel, must be integrated early in the planning process for all phases of deployed operations, including predeployment, deployment, and redeployment. Austere…Current192 pagesEngineering
TM 9-1015-200-20&P 1-8. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. A CANNON ASSEMBLY. The barrel is an externally threaded tube, closed at one end by a base cap that locks into the socket cap of baseplate. The cannon is used to fire…Historic76 pagesFires
TM 9-1015-200-30&P 1-8. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. A CANNON ASSEMBLY. The barrel is an externally threaded tube, closed at one end by a base cap that locks into the socket cap of baseplate. The cannon is used to fire…Historic87 pagesFires
Hand receipt covering the components of end item (COEI), basic issue items (BII), and additional authorization list (AAL) for the Heavy Expanded Mobility Tactical Truck (HEMTT) family (cargo, tank, tractor, wrecker, and load…Archive33 pagesSustainment
Operator's (crew) manual for the towed 20mm air defense artillery gun M167A1, covering operation of the M168 cannon, AN/VPS-2 radar set, and associated ammunition and equipment.Historic297 pagesMarksmanship Weapons
Section GENERAL 1-1. Scope a. This manual describes Radio Repeater Set AN/TRC-138 (fig. 1-1 and 1-2) and covers the installation; operation; and operator, organizational, direct, and general support maintenance. NOTE The AN/TRC-138 is…Archive180 pagesComms Signal
This document provides generic guidance to agencies responsible for the development and implementation of maintenance programs for site utility systems at Command, Control, Communications, Computers, Intelligence, Surveillance, and…Archive261 pagesNewer: 2005Engineering
and scope. systems in good operating condition. This includes a. This technical manual provides basic information for facilities personnel regarding the operation and maintenance of small heating systems and related equipment. Generally,…Archive168 pagesEngineering
Be sure to clear weapon before disassembling, cleaning, inspecting, transporting or storing. 2. Stay clear of muzzle and always keep weapon pointed downrange. 3. Keep safety on until you are ready to fire. 4. Before firing, make sure the…Archive239 pagesMarksmanship Weapons
The United States Army Engineer School developed this publication with the joint participation of the approving Service commands. The test procedures and terminology used in this manual conform to the latest methods and specifications of…Current402 pagesEngineering
1. Scope a. This manual is intended for the use of personnel whose duties require a general knowledge of the materials employed in cleaning, preserving, abrading, cementing, and sealing of Ordnance materiel. It contains information…Historic60 pagesSustainment
EQUIPMENT DESCRlPTlON AND DATA 0002 00 EQUIPMENT CHARACTERISTICS, CAPABlLlTlES AND FEATURES. The M60 and M60D are air-cooled and have fixed headspace allowing quick barrel changes for cooling and maintenance when required. In order to…Archive220 pagesMarksmanship Weapons
TM9-2320-283-10-HR 3. EXPLANATION OF BLOCKS AND COLUMNS (DA FORM 2082). Refer to Chapter 2, AR 710-2. Additional information required to complete DA Form 2062 is listed below: a. Hand receipts shall identify the accounting requirement…Archive13 pagesSustainment
Lethal voltage is present when light set is connected to power source. Disconnect from power source before inspecting or repairing any electrical component. Electrical shock or death may result from failure to heed this warning. Lethal…Archive241 pagesSustainment
New, or updated text, is indicated by a vertical bar in the outer margin of the page. Changes to illustrations are indicated by pointing hands.Archive181 pagesSustainment
STOCK No. COMPONENT AND SUPPQRT, ITEMS, (Continued) 5120-00-301-0037 PULLER, track end connector (Tink pin): under drawers in front oddment compt., right side, 8/08874 (19207) 5120-00-277-6470 WRENCH, track adjusting, 3-13/64": on cal. .50…Archive30 pagesSustainment
TM 10-5411-224-14 WARNINGS WEIGHT / HAZARD The LMS weighs in excess of 600 pounds. Failure to follow safety procedures when the shelter is being lifted and handled can result in severe injury or death. The door assembly weighs in excess of…Archive153 pagesSustainment
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.