1-1. Purpose and Scope This manual provides guidance for the design and layout of civil works pumping stations used for removal of interior drainage from areas protected by local flood protection works and for water supply. The discussion…Archive34 pagesEngineering
of follow-on forces. Firepower, both lethal and nonlethal, synergistically combines with maneuver in conducting deep operations. The corps uses a Decide-Detect-Track-Deliver Assess approach that enables the comrnander to take the…Historic293 pagesEngineering
Meeting America's strategic objectives hinges on the ability to rapidly deploy forces at any time, in any environment, and against any adversary. Contingency basing provides strategic integration of policy, planning, and resourcing for…Current190 pagesEngineering
Chapter 1 GENERAL ENGINEERING G eneral engineering encompasses those engineer tasks which increase the mobility, survivability, and sustainability of tactical and logistical units to the rear of the forward line of troops (FLOT). Such…Archive162 pagesEngineering
and scope. This manual establishes criteria for guidance of Corps of Engineers personnel in the planning and design of proposed military ports. It includes site selection and evaluation, layout of harbor facilities, coastal protection…Archive146 pagesEngineering
Marine Corps Warfighting Publication (MCWP) 3-17.2, MAGTF Explosive Ordnance Disposal, defines the principles for structuring and conducting explosive ordnance disposal (EOD) operations across a range of operations in all operating…Current65 pagesEngineering
FM 31-82 planning factors required for base construction (FM 101-10-1). g. Standards of Construction— Level of quality of facilities which influences materially the level and amount of construction to be accomplished. Standards are based…Archive49 pagesEngineering
18 July 2012 ATTP 3-37.31 1-1 Chapter 1 Foundations of Civilian Casualty Mitigation This chapter begins by explaining the purpose of civilian casualty mitigation and defining key terms. Next, it outlines legal authorities that form the…Archive58 pagesEngineering
1. Purpose This manual provides a reference for officers at battalion level or lower who are responsible for planning and implementing visual deception phases of field operations and for training troops in the simulation of military…Historic196 pagesEngineering
The purpose of this manual is to help personnel use the Army Facilities Components System (AFCS) and its products when preparing for and executing Army con- struction missions in a theater of operations (TO). 1-2. SCOPE This manual is a…Archive78 pagesEngineering
1-1. Purpose Master planning is a continuous analytical process which involves evaluation of factors affecting the present and future physical development of an installation. This evaluation forms the basis for determination of development…Archive60 pagesEngineering
1. Scope This publication provides joint doctrine to plan, execute, and assess explosive ordnance disposal support across the range of military operations. 2. Purpose This publication has been prepared under the direction of the Chairman…Current170 pagesEngineering
Modern warfare relies on systems powered by electricity, making electricity an essential element that supports all warfighting functions. Command and control, intelligence, movement and maneuver, fires, sustainment and logistics, and…Current100 pagesEngineering
and scope. a. This manual provides criteria and guidance for design of foundations for structures for military facilities in arctic and subarctic regions. b. To facilitate the use of this manual, superscript numbers are used to refer to…Archive269 pagesEngineering
Utilizing local real estate facilities service is responsible for real estate activities, to the greatest extent possible, thus the theater Army judge advocate has the minimizing the need for new conresponsibility for the supervision of…Historic61 pagesEngineering
1-1. Purpose The purpose of TM 5-814-7 is to establish Army design criteria that comply with the national goal of ground-water protection. On the Federal level, subtitle C of the Resource Conservation and Recovery Act (RCRA) of 1976 (42…Archive82 pagesEngineering
of follow-on forces. Firepower, both lethal and nonlethal, synergistically combines with maneuver in conducting deep operations. The corps uses a Decide-Detect-Track-Deliver Assess approach that enables the comrnander to take the…Archive295 pagesEngineering
and scope. This manual provides guidance to facilities maintenance personnel in the maintenance of interior electrical systems of 600 volts and less. These systems include such components as illumination, low voltage systems, rotating…Archive180 pagesEngineering
1-1. Purpose This manual provides guidance for dust control methods and materials that can be used successfully at airfields and heliports to stop dust from forming naturally or as a result of man's activities and to control dust in areas…Archive42 pagesEngineering
of liquid contaminants into the environment is in violation of state, federal, and military regulations. Refer to Army POL (WP 0001 00) for information concerning storage, use, and disposal of these liquids. Failure to comply may result in…Archive583 pagesEngineering
Section I. GENERAL INFORMATION 1-1. Purpose This manual is a guide for the inspection, maintenance, and repair of bridges for military installations. It is a source of reference for planning, estimating, and technical accomplishment of…Archive186 pagesEngineering
Engineer Diving Operations FM 5-490 CHAPTER 1 EMPLOYMENT OF ENGINEER DIVERS Engineer divers support all specialized secondary mission is to support maneuver underwater missions in the TO. The units during water-crossing operations in…Archive36 pagesNewer: 1992Engineering
Section I. GENERAL 1-1. Scope. This manual is for your use in operating and maintaining the Etnyre Bituminous Distributor, Model D-63, which is mounted on a M918 truck chassis instructions for operating and maintaining the vehicle chassis…Historic104 pagesEngineering
WARNING Composition C2, C3, and C4 explosives are poisonous and dangerous if chewed or ingested. Their detonation or burning produces poisonous fumes-do not use as a heat source.Historic221 pagesEngineering
1. Purpose This manual describes the topographic symbols and abbreviations authorized for use by all echelons in the interpretation of military maps, overlays, and related features and activities. 2. Scope This manual is divided into four…Archive95 pagesEngineering
By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected…Archive368 pagesEngineering
This publication has been prepared under our direction for use by our respective commands and other commands as appropriate.Archive160 pagesEngineering
This document has been prepared to provide generic guidance to agencies responsible for the development and implementation of maintenance programs for site utility systems at command, control, communications, computers, intelligence,…Archive213 pagesEngineering
TM 5-813-8 CHAPTER 1 GENERAL 1-1. Purpose. This manual describes the guidelines to be followed in selecting a process capable of producing potable water supplies from brackish and sea water sources. Potable water is defined in TB MED 576.…Archive115 pagesEngineering
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.