ADP 3-37 ·Army ·2026 Protection
Protection is the preservation of the effectiveness and survivability of mission-related military and nonmilitary personnel, equipment, facilities, information, and infrastructure deployed or located within or outside the boundaries of a…
TM 5-1940-277-10 ·Army ·1993 Operator's Manual: Boat, Bridge Erection, Twin Jet, Aluminum Hull, Model USCSBMK 1 and Model USCSBMK 2
TM 5-1940-277-10 TM 1940-10/1 Change 3 a SERIOUS INJURY OR DEATH may result if personnel fail to observe the following safety precautions. Batteries give off explosive hydrogen gas. Be careful making connections. Do not smoke when…
TM 3-34.22 ·Army ·2013 Military Nonstandard Fixed Bridging
This manual provides essential technical information on nonstandard fixed bridges for engineer staff officers. It is the doctrinal source of information for the United States (US) Army on the North Atlantic Treaty Organization (NATO)…
FM 3-34.343 ·Army ·2002 Military Nonstandard Fixed Bridging
This manual provides essential technical information on nonstandard fixed bridges for engineer staff officers. It is the doctrinal source of information for the United States (US) Army on the North Atlantic Treaty Organization (NATO)…
FM 5-100 ·Army ·1979 Engineer Combat Operations
Today more than ever before, the engineer plays a critical role as a member of the combined arms team. As movement and lethality on the battlefield increase, the requirement to reinforce the terrain increases. The engineer brings to the…
ATP 3-34.22 ·Army ·2021 Engineer Operations--Brigade Combat Team and Below
This manual provides engineer doctrine for operating at the BCT level and below and within the framework of unified land operations. This manual also provides greater detail for commanders and staffs at brigade echelons and below as well…
TC 3-34.200 ·Army ·2021 Bridge Crewmember Qualification Tables
TC 3-34.200 is designed to focus on mission-essential task (MET) proficiency. It is the Engineer Regiment's responsibility to provide commanders with the tools to qualify their engineer squads/sections and platoons, to provide quality…
FM 31-60 ·Army ·1966 River Crosing Operations
of active and passive air defense means to in- weapons, dispersion, concealment, camouflage, elude use of organic automatic and small arms and night operations. Section II. DEFINITIONS AND BASIC CONSIDERATIONS 4. Definitions a. Bridgehead.…
FM 5-1 ·Army ·1965 Engineer Troop Organizations and Operations (C3)
Participating as a part of the combined arms team in all forms of combat operations. This includes the offense, the defense, and the retrograde in all types of operations, including airborne, internal defense, and amphibious operations. In…
MCTP 10-10D ·Marine Corps ·2018 MAGTF Explosive Ordnance Disposal
Marine Corps Warfighting Publication (MCWP) 3-17.2, MAGTF Explosive Ordnance Disposal, defines the principles for structuring and conducting explosive ordnance disposal (EOD) operations across a range of operations in all operating…
FM 5-20C ·Army ·1944 War Department Field Manual, Corps of Engineers, Camouflage of Bivouacs, Command Posts, Supply Points, and Medical Installations
Study aerial photographs and large-scale maps of area to be occu pied. Make one or more tentative camouflage plans designed to take advantage of dark and heavily textured parts of the ground pattern. 2. Make ground reconnaissance of area.…
NAVEDTRA 14115 ·Navy ·1993 Gas Turbine Systems Technician (Mechanical) 2
By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected…
FM 5-7-30 ·Army ·1994 Brigade Engineer and Engineer Company Combat Operations
FM 5-7-30 Field Manual (FM) 5-7-30 is the capstone manual for engineer support to airborne, air assault, and light infantry brigade operations. It is designed to be the engineer extension to FM 7-30. The manual serves as a guide for light…
ATP 3-34.40 ·Army ·2023 General Engineering (Mctp 3-40D(MCWP 3-17.7))
ATP 3-34.40/MCTP 3-40D provides doctrine for the conduct of general engineering support by the Army and Marine Corps. It emphasizes the general engineering unity of effort by providing a common philosophy, language, and purpose. General…
MCTP 3-40D ·Marine Corps ·2023 General Engineering
ATP 3-34.40/MCTP 3-40D provides doctrine for the conduct of general engineering support by the Army and Marine Corps. It emphasizes the general engineering unity of effort by providing a common philosophy, language, and purpose. General…
ATP 3-34.81 C1 ·Army ·2016 Engineer Reconnaissance (Mcwp 3-17.4)
ATP 3-34.81 provides techniques for the performance of tactical and technical engineer reconnaissance in support of military activities that are conducted across the full range of military operations. This publication supports doctrine…
TM 5-803-5 ·Army ·1981 Installation Design
Introduction. 1-1. Purpose of the Manual. A. Introduction. Military installations should provide efficient and pleasant physical environments conducive to attracting and retaining skilled and motivated personnel. A military installation…
TM 5-684 ·Army ·1996 Facilities Engineering: Electrical Exterior Facilities
Section I - PRIMARY CONSIDERATIONS 1-1. Purpose and scope. This manual provides guidance for the maintenance and repair of exterior electrical distribution systems. New construction of exterior electrical facilities, even when funded from…
TM 5-811-1 ·Army ·1995 Electrical Power Supply and Distribution
TM 5-811-1/AFJMAN 32-1080 CHAPTER 1 GENERAL 1-1. Purpose. This manual provides Department of the Army and Air Force policy and guidance for design criteria and standards for electrical power supply and distribution systems. 1-2. Scope. The…
NAVEDTRA 14114 ·Navy ·Undated Gas Turbine Systems Technician (Electrical) 3/Gas Turbine Systems Technician (Mechanical) 3, Volume 2
By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected…
TM 5-803-1 ·Army ·1986 Installation Master Planning
1-1. Purpose Master planning is a continuous analytical process which involves evaluation of factors affecting the present and future physical development of an installation. This evaluation forms the basis for determination of development…
FM 5-71-100 ·Army ·1990 Division Engineer Combat Operations
FM 5-71-100 CHAPTER 1 Engineer Operations and the Division Battlefield The division is the US Army's largest, fixed organization that trains and fights as a tactical team. It is organized with various combat, combat support (CS), and…
FM 510015 ·Army ·1944 Corps Engineer Operations
of follow-on forces. Firepower, both lethal and nonlethal, synergistically combines with maneuver in conducting deep operations. The corps uses a Decide-Detect-Track-Deliver Assess approach that enables the comrnander to take the…
TM 5-818-6 ·Army ·1970 Grouting Methods and Equipment
This manual was prepared to provide guidance in the use of pressure grouting as a means to correct existing or anticipated subsurface problems. Information on procedures, materials, and equipment for use in planning and executing a…
FM 5-164 ·Army ·1974 Tactical Land Clearing
1-1. Purpose The purpose of this manual is to provide commanders and their staffs with information and data which can guide them in their conduct of tactical clearing operations. It provides a consolidation of the latest information and…
ATP 3-34.45 ·Army ·2024 Electric Power Generation and Distribution {mcrp 3-40D.17}
Modern warfare relies on systems powered by electricity, making electricity an essential element that supports all warfighting functions. Command and control, intelligence, movement and maneuver, fires, sustainment and logistics, and…
ATP 3-34.80 ·Army ·2024 Geospatial Engineering
Geospatial engineering is one of three engineering disciplines. It supports all staff sections and warfighting functions across every echelon of Army forces and plays a significant role in supporting the combat and general engineering…
FM 5-162 ·Army ·1968 Engineer Construction and Construction-Support Units
I ► í î 1-1. Purpose This manual provides guidance for comman- ers, staff officers, and other personnel con- cerned with the employment of engineer con- struction and construction-support units. 1-2. Scope a. This manual covers the…
FM 31-10 ·Army ·1962 Barrier and Denial Operations
constructed and cleared quickly and on supporting fires to re- duce the enemy's mobility and, relatively speaking, increase that of the friendly forces. Even though men with weapons can re- strict enemy movement without barriers and…
FM 5-144 ·Army ·1963