1. Scope This publication describes liaison functions and roles. It outlines the specific responsibilities of the receiving organization, the sending organization, and the liaison officer (LNO)/ LNO team. The primary focus of this…Archive76 pagesEngineering
REPRODUCTION AUTHORILATION/RESTRICTlONS This manual has been prepared by or for the Government and, except to the extent indicated below, is public property and not subject to copyright. Reprint or republication of this manual should…Archive144 pagesEngineering
This training circular provides an overview of engineer construction support provided to the Army IPDS petroleum supply, principles, and petroleum distribution in a TO. The information in this training circular can be used by all…Current112 pagesEngineering
1—1. Purpose and Scope This manual is intended to provide engineer and other military personnel with a compilation of data for use in planning of engineer activities. It includes data pertaining to engineer troops, equipment, construction…Historic536 pagesEngineering
FM 5-114 Chapter 1 The Strategic Environment National Strategy Goals—Throughout our history, our national security strategy has pursued broad, consistent goals. We have always sought to protect the safety of our nation, its citizens, and…Archive195 pagesEngineering
Production, reproduction, and distribution of maps and map substitutes to plan and guide the military effort as a whole. (2) Engineers impede movement of the enemy by execution of demolitions and creation of obstacles; they increase combat…Historic397 pagesNewer: 1943Engineering
Chapter 1 Basics CCD is the use of materials and techniques to hide, blend, disguise, decoy, or disrupt the appearance of military targets and/or their backgrounds. CCD helps prevent an enemy from detecting or identifying friendly troops,…Archive98 pagesEngineering
ADRP 3-37 is a new publication that expands on the protection principles found in ADP 3-37. The doctrine described in this publication is nested within ADRP 3-0 and describes protection as a continuing activity and a warfighting function.…Archive72 pagesEngineering
26 November 2010 ATTP 3-34.39/MCRP 3-17.6A 1-1 Chapter 1 Basics CCD is the use of materials and techniques to hide, blend, disguise, decoy, or disrupt the appearance of military targets and/or their backgrounds. CCD helps prevent an enemy…Archive88 pagesEngineering
Field Manual (FM) 90-7 is intended for the combined arms commander and staff. It encompasses doctrine established in FMs 5-100, 6-20 series, 71-100, 100-5, and 100-7. The doctrine presented in the following chapters seeks to develop the…Archive178 pagesEngineering
ated; and the destruction of enemy emplacements by demolition or other means. (11) Engineer reconnaissance. This mis- sion is continuous and is a responsi- bility of all engineers, not just those personnel designated for the task. In…Historic92 pagesNewer: 1971Engineering
18 July 2012 ATTP 3-37.31 1-1 Chapter 1 Foundations of Civilian Casualty Mitigation This chapter begins by explaining the purpose of civilian casualty mitigation and defining key terms. Next, it outlines legal authorities that form the…Archive58 pagesEngineering
Make reconnaissance of area to be occupied. If aerial photographs and large-scale maps are obtainable, study them before and during reconnaissance. Purpose is to (1) Provide adequate dispersion. (2) Site unit parking within dark and…Historic61 pagesEngineering
Field Manual (FM) 3-37 provides doctrinal guidance for commanders and staffs who are responsible for planning and executing protection in support of full spectrum operations. It describes protection as both an element of combat power and…Archive134 pagesEngineering
Field Manual (FM) 3-34.400 is the primary implementing manual for the engineer function that bears its name (the others being combat and geospatial engineering). This FM provides the linkage between the engineering doctrine contained in FM…Archive264 pagesEngineering
COMMANDING OFFICER NETPDTC 6490 SAUFLEY FIELD RD PENSACOLA, FL 32509-5237 10 Aug 1999 ERRATA Specific Instructions and Errata for Nonresident Training Course GAS TURBINE SYSTEMS TECHNICIAN (ELECTRICAL) 1. No attempt has been made to issue…Archive282 pagesEngineering
FM 5-71-2 critical decisions within their maneuver plans and operations. Engineer leaders ensure that engineer forces are at their highest combat readiness by continuously preparing and training them under the toughest conditions.…Archive153 pagesEngineering
Appendix A UXO OBSTACLE NUMBERING UXO hazard areas are integrated into the standard obstacle numbering system using the procedures described below. Army and Marine Corps use the same numbering system. Army units are used for example only.…Archive50 pagesEngineering
FM 90-13 KQTLGB' (Sírio:ss;e:s fioñ tne CHAPTER crossing operation concepts iver crossing operations are an integral part of land warfare. The lethality of modem weapons and the capability of larger enemy formations dictate that crossing…Historic187 pagesNewer: 1992Engineering
1-2 ENGINEER FIELD MANUAL demands of modern warfare, in which emphasis is placed upon mobility and transportation, require that even forward roads be kept fit for the rapid movement of heavily loaded motor vehicles. The great weight of…Historic463 pagesEngineering
FM 3-34.2 provides combined-arms commanders, from company to brigade, and their staffs with the doctrine, tactics, and techniques needed to successfully overcome obstacles. It provides the commander with breaching fundamentals and…Archive149 pagesEngineering
Section I. THE AIRBORNE DIVISION 2-1. Mission The primary mission of the airborne division is the destruction of enemy military forces and the seizure or domination of critical land areas, their populations, and resources. In ad- dition to…Historic92 pagesNewer: 1970Engineering
Before using any handtool, inspect it. Repair or replace loose, splintered, or defective handles; damaged blades or parts; rough edges or burrs; and any other defects that lower the strength or make it unsafe for use. Store handtools in a…Historic244 pagesEngineering
Suspend all handling of the pipeline system when an electrical storm is within a 5-mile radius of your operation, during high winds, or when your commander notifies you. ¢Archive186 pagesEngineering
The Army Engineer Regiment has a mixture of capabilities that spans the active and reserve components to the United States Army Corps of Engineers (USACE) and Civilian corps. The regiment contains three basic categories of operating force…Current160 pagesEngineering
CHAPTER 2 SUBJECT FIELDS OF ENGINEER INTELLIGENCE 4. Scope of Engineer Information Engineer information is data in any form (oral, written, or graphic) on— a. The terrain, including the location, identity, and physical description of…Archive58 pagesEngineering
21. Map Depot Operations * * * * * c. Depot sites should * * * of the depot (fig. 6). Approximate covered storage requirements for the various map depots is as follows. (1) (Added) A base map depot for each group of three field armies…Historic120 pagesNewer: 1968Engineering
This manual has been prepared by or for the Government and, except to the extent indicated below, is public property and not subject to copyright. Copyrighted material included in the manual has been used with the knowledge and permission…Archive158 pagesEngineering
ATP 4-32.3 discusses and articulates the roles of the company, platoon, and team operations. ATP 4-32.3 addresses the adapted changes to the organizational structure from the approved EOD force design update. ATP 4-32.3 expands on company,…Current80 pagesEngineering
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.