TM 5-811-3 ·Army ·1985 Electrical Design: Lightning and Static Electricity Protection
TM 5-811–3/AFM 88–9, Chap. 3 sate for the following conditions as encountered at corrosion. This must be prevented by use of same project locations: type metals, or by providing junctions of dissimilar (1) Corrosive soils and atmosphere.…
TM 5-811-6 ·Army ·1984 Electric Power Plant Design
1-1. Purpose a. General: This manual provides engineering data and criteria for designing electric power plants where the size and characteristics of the electric power load and the economics of the particular facilit y justify on-site…
TM 5-811-7 ·Army ·1985 Electrical Design, Cathodic Protection
Purpose. one small section of a pipeline may be anodic This manual presents design guidance for cathodic protection systems. 1-2. References. a. Government publications. flows because of a potential difference between the Department of…
TM 5-813-1 ·Army ·1987 Water Supply Sources and General Considerations
All construction (structures, pipe, equipment) required for the collection, transportation, pumping, treatment, storage and distribution of water. (2) Supply works. Dams, impounding reservoirs, intake structures, pumping stations, wells…
TM 5-813-3 ·Army ·1985 Water Supply, Water Treatment
TM 5-813-3/AFM 88-10, Vol 3 CHAPTER 1 GENERAL 1-1. Purpose and scope. This manual, intended for planners and design engineers, presents information on water quality standards and design criteria for water treatment processes. This manual…
TM 5-813-5 ·Army ·1986 Water Supply, Water Distribution
TM 5-813-5/AFM 88-10, Vol. 5 CHAPTER 1 GENERAL 1-1. Purpose and scope. This manual provides criteria for design and construction of potable water distribution systems for fixed military installations. Within the context of this manual, a…
TM 5-813-8 ·Army ·1986 Water Desalination
TM 5-813-8 CHAPTER 1 GENERAL 1-1. Purpose. This manual describes the guidelines to be followed in selecting a process capable of producing potable water supplies from brackish and sea water sources. Potable water is defined in TB MED 576.…
TM 5-814-1 ·Army ·1985 Sanitary and Industrial Wastewater Collection: Gravity Sewers and Appurtenances
ARMY TM 5-814-1 AIR FORCE AFM 88-11, Volume 1 SANITARY AND INDUSTRIAL WASTEWATER COLLECTION- GRAVITY SEWERS AND APPURTENANCES DEPARTMENTS OF THE ARMY, AND THE AIR FORCE MARCH 1985 TM5-814-1/AFM88-11,Volume1 REPRODUCTION…
TM 5-814-2 ·Army ·1985 Sanitary and Industrial Wastewater Collection: Pumping Stations and Force Mains
and lifting of raw wastewater into the waste treatment plant, (3) transfer of recycled and bypassed flows throughout the plant, and (4) discharge of treated effluent. Pumping systems for the handling of sludge, grit and scum are presented…
TM 5-814-3 ·Army ·1988 Domestic Wastewater Treatment
TM 5-814-3/AFM 88-11, Volume III v LIST OF FIGURES (cont'd) Figure 10-3. Plan and cross-sectional views of a comminutor installation. 10-4. Typical comminutor performance. 10-5. Power required for flocculation. 11-1. Effective surface area…
TM 5-814-5 ·Army ·1994 Sanitary Landfill
Purpose. or subsurface aquifers or otherwise harm the This manual establishes the minimum design requirements for sanitary landfills, provides engineering criteria for construction, and lists recommended practices for planning and…
TM 5-814-7 ·Army ·1984 Hazardous Waste Land Disposal/Land Treatment Facilities
1-1. Purpose The purpose of TM 5-814-7 is to establish Army design criteria that comply with the national goal of ground-water protection. On the Federal level, subtitle C of the Resource Conservation and Recovery Act (RCRA) of 1976 (42…
TM 5-814-8 ·Army ·1987 Evaluation Criteria Guide for Water Pollution Prevention, Control, and Abatement Programs
Corps of Engineers technical manual of evaluation criteria for water pollution prevention, control, and abatement programs at Army facilities (1987).
TM 5-818-1 ·Army ·1983 Soils and Geology Procedures for Foundation Design of Buildings and Other Structures (Except Hydraulic Structures)
1-1. Purpose. This manual presents guidance for selecting and designing foundations and associated features for buildings, retaining structures, and machinery. Foundations for hydraulic structures are not included. Foundation design…
TM 5-818-4 ·Army ·1983 Backfill for Subsurface Structures
1-1. Background. Military facilities for the Army and Air Force have included construction of buildings and other structures partially below ground surface. In more recent years, missile launching and support structures, fallout and…
TM 5-818-5 ·Army ·1983 Dewatering and Groundwater Control
and scope. This manual provides guidance for the planning, design, supervision, construction, and operation of dewatering and pressure relief systems and of seepage cutoffs for deep excavations for structures. It presents: description of…
TM 5-818-6 ·Army ·1970 Grouting Methods and Equipment
This manual was prepared to provide guidance in the use of pressure grouting as a means to correct existing or anticipated subsurface problems. Information on procedures, materials, and equipment for use in planning and executing a…
TM 5-818-7 ·Army ·1983 Foundations in Expansive Soils
1-1. Purpose This manual presents guidance and information for the geotechnical investigation necessary for the selection and design of foundations for heavy and light military-type buildings constructed in expansive clay soil areas. The…
TM 5-818-8 ·Army ·1995 Engineering Use of Geotextiles
1-1. Purpose This manual describes various geotextiles, test methods for evaluating their properties, and recommended design and installation procedures. 1-2. Scope This manual covers physical properties, functions, design methods, design…
TM 5-820-1 ·Army ·1987 Surface Drainage Facilities for Airfields and Heliports
This manual has been prepared by or for the Government and, except to the extent indicated below, is public property and not subject to copyright. Copyrighted material included in the manual has been used with the knowledge and permission…
TM 5-820-3 ·Army ·1991 Drainage and Erosion-Control Structures for Airfields and Heliports
Purpose. the design of all drainage structures must be emThis manual discusses water disposal methods which ensure the safe and efficient operation of airport and heliport facilities, to describe an efficient drainage system, and to detail…
TM 5-820-4 ·Army ·1983 Drainage for Areas Other Than Airfields
and scope. The purpose of this manual is to discuss normal requirements for design of surface and subsurface drainage systems for military construction other than airfields and heliports at Army, Air Force and similar installations. Sound…
TM 5-822-10 ·Army ·1988 Standard Practice for Pavement Recycling
and scope. This manual contains guidance for preparing plans and specifications and for ensuring the quality of recycled bituminous and portland cement concrete. In addition, this manual provides useful information to design engineers,…
TM 5-822-11 ·Army ·1993 Standard Practice for Sealing Joints and Cracks in Rigid and Flexible Pavements
TM 5-822-11/AFP 88-6, Chap. 7 1-1 CHAPTER 1 GENERAL 1-1. Purpose. This manual contains guidance for ensuring the quality of joint and crack sealing or resealing of bituminous and portland cement 1-3. References. Appendix A contains a list…
TM 5-822-12 ·Army ·1990 Design of Aggregate Surfaced Roads and Airfields
This manual has been prepared by or for the Government and is public property and not subject to copyright. Reprints or republications of this manual should include a credit substantially as follows: "Department of the Army, Technical…
TM 5-822-14 ·Army ·1994 Soil Stabilization for Pavements
1-1. Purpose. This manual establishes criteria for improving the engineering properties of soils used for pavement base courses, subbase courses, and subgrades by the use of additives which are mixed into the soil to effect the desired…
TM 5-822-2 ·Army ·1987 General Provisions and Geometric Design for Roads, Streets, Walks, and Open Storage Areas
and scope. This manual establishes general provisions and geometric design criteria for guidance in the design of roads, streets, walks, and open storage areas at military installations. 1-2. Definitions. The definitions presented below…
TM 5-822-5 ·Army ·1992 Pavement Design for Roads, Streets, Walks, and Open Storage Areas
1-1. Purpose. (5) Modulus of rupture (flexural strength) for This manual provides criteria for the design of pavements for roads, streets, walks, and open storage areas at U.S. Army and Air Force installations. 1-2. Scope. This manual…
TM 5-822-7 ·Army ·1987 Standard Practice for Concrete Pavements
STANDARD PRACTICE FOR CONCRETE PAVEMENTS 1. Purpose. This manual provides information on the materials and construction procedures for concrete pavements. 2. Scope. This manual describes the constituents to be used in concrete, the…
TM 5-822-9 ·Army ·1989