This FM is a guide for military occupational specialty (MOS) 82D (Topographic Surveyor). It provides techniques not found in any commercial text concerning the precise determination of position, azimuth, or elevation of a point.…ArchiveEngineering
This manual provides essential technical information on nonstandard fixed bridges for engineer staff officers. It is the doctrinal source of information for the United States (US) Army on the North Atlantic Treaty Organization (NATO)…Archive558 pagesEngineering
Field Manual (FM) 3-34.400 is the primary implementing manual for the engineer function that bears its name (the others being combat and geospatial engineering). This FM provides the linkage between the engineering doctrine contained in FM…Archive264 pagesEngineering
This manual is a guide for engineer personnel responsible for conducting plumbing and pipe fitting operations. This manual provides information on water, waste, and heating systems and basic plumbing techniques. Use this guide to help…ArchiveEngineering
Field Manual (FM) 3-37 provides doctrinal guidance for commanders and staffs who are responsible for planning and executing protection in support of full spectrum operations. It describes protection as both an element of combat power and…Archive134 pagesEngineering
constructed and cleared quickly and on supporting fires to re- duce the enemy's mobility and, relatively speaking, increase that of the friendly forces. Even though men with weapons can re- strict enemy movement without barriers and…Historic140 pagesEngineering
of sabotage de- vices and clandestine weapons into the sphere of EOD operations. (5) Establishing and maintaining a re- sponsive and uniform explosive ord- nance incident reporting and control system. (6) Providing the required numbers of…Historic136 pagesEngineering
of active and passive air defense means to in- weapons, dispersion, concealment, camouflage, elude use of organic automatic and small arms and night operations. Section II. DEFINITIONS AND BASIC CONSIDERATIONS 4. Definitions a. Bridgehead.…Historic104 pagesEngineering
FM 31-82 planning factors required for base construction (FM 101-10-1). g. Standards of Construction— Level of quality of facilities which influences materially the level and amount of construction to be accomplished. Standards are based…Archive49 pagesEngineering
1. Scope This multiservice tactics, techniques, and procedures (MTTP) manual provides guidance and procedures for the employment of an explosive ordnance disposal (EOD) force when operating in a joint capacity throughout the range of…Archive101 pagesEngineering
oY ) enemy vessels (especially submarines, which are the _ largest vessels capable of approaching undetected by surface surveillance) from entering a protected area and, at the same time, to permit the safe passage of friendly shipping.…Historic102 pagesEngineering
1. Scope This publication describes liaison functions and roles. It outlines the specific responsibilities of the receiving organization, the sending organization, and the liaison officer (LNO)/ LNO team. The primary focus of this…Archive76 pagesEngineering
1-2 ENGINEER FIELD MANUAL demands of modern warfare, in which emphasis is placed upon mobility and transportation, require that even forward roads be kept fit for the rapid movement of heavily loaded motor vehicles. The great weight of…Historic463 pagesEngineering
States of the Military Goal Examples Environment Operations * Large-scale combat War Fight and win War iAttacks * Defenses * Strikes and raids A N * Peace enforcement Conflict Deter war and Other than Support to insurgency resolve conflict…Archive219 pagesEngineering
Mobility on the Battlefield THE AIRLAND BATTLE CHALLENGE AIRLAND BATTLE DOCTRINE AirLand battle doctrine, described in FM 1005, is the Army's "how to fight" doctrine. It applies to deployment and operation of US forces at and between two…Archive243 pagesEngineering
The most dangerous threat to United States' (US) national interests will most likely involve highly trained enemy forces using Soviet style tactics, organizations, and equipment. The actual battle will be intense, fast, and deadly. United…Archive218 pagesEngineering
The purpose of military operations in the next battle is to win. To achieve success, our forces must gain the initiative, deploy in depth, and stress agility and synchronization of activities and functions. Such an approach will prevent…Archive257 pagesEngineering
Chapter 1 GENERAL ENGINEERING G eneral engineering encompasses those engineer tasks which increase the mobility, survivability, and sustainability of tactical and logistical units to the rear of the forward line of troops (FLOT). Such…Archive162 pagesEngineering
FM 5-105 special-purpose topographic products tailored to meet the supported commander's needs. These units belong to the topographic battalion in the theater of operations, but maintain a habitual relationship with their supported…Archive56 pagesEngineering
his manual establishes doctrine for the use of atomic demolition ‘munitions (ADM) on the battlefield. It is a guide to commanders and their staffs during the planning and execution phases of tactical nuclear operations. It provides the…Archive207 pagesEngineering
FM 5-114 Chapter 1 The Strategic Environment National Strategy Goals—Throughout our history, our national security strategy has pursued broad, consistent goals. We have always sought to protect the safety of our nation, its citizens, and…Archive195 pagesEngineering
of Manila, but its principal use today is in fittings, such as ratline, marline, and spun than the hard fibers, these fittings are invariably tarred to make them more water-resistant. Tarred hemp has about 80 percent of the strength of…Archive165 pagesEngineering
Before using any handtool, inspect it. Repair or replace loose, splintered, or defective handles; damaged blades or parts; rough edges or burrs; and any other defects that lower the strength or make it unsafe for use. Store handtools in a…Historic244 pagesEngineering
FM 5-134 C H A P T E R 1 B A S I C C O N S I D E R A T I O N S Section I. DEFINITIONS AND CLASSIFICATIONS 1-1. Definitions. a. Piles. A pile is a long, columnar element made of timber, steel, concrete, or a combination of these materials…Archive176 pagesEngineering
FM 5-142 anee in the construction of obstacles requiring engineer skills and special equipment. c. Construction, repair, and maintenance of routes including roads, bridges, cableways, and tramways. d. Installation, major repair, and…Historic136 pagesEngineering
This manual provides interim guidance to commanders, staff officers, and other personnel concerned with Engineer support under the TASTA-70 concept of organization and operation. This information can be utilized to facilitate…Historic36 pagesEngineering
Section I. GENERAL ★l-l. Purpose and Scope a. This manual provides guidance for com- manders, staff officers, and others concerned with the planning, employment and operations of specialized engineer amphibious units. It provides…Historic273 pagesEngineering
FM 5-146 CHAPTER 1 Overview GENERAL This chapter presents a general discussion of topographic support, operations, products, and developments. Each area is discussed in greater detail under specific unit operations in later chapters.…Historic84 pagesEngineering
FM 5-15 d. Dispersion. The separation of units and c. Simplicity and Economy. The emplaceindividuals is a primary means of increasing ment or shelter should be strong and simple, protection, particularly from the effects of nu- require as…Historic131 pagesEngineering
FM 5-162 CHAPTER 2 CONSTRUCTION IN A THEATER OF OPERATION Section I. MISSIONS, ROLES, SUPPORT, AND RESPONSIBILITIES 2-1. Mission of the Engineer Construction and Construction Support Units a. General. The overall mission of engineer con-…Historic196 pagesEngineering
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.