The following are general safety precautions that are not related to any specific procedures and therefore do not appear elsewhere in this publication. These are recommended precautions that personnel must understand and apply during many…Archive213 pagesSustainment
TM 5-1940-277-10 TM 1940-10/1 Change 3 a SERIOUS INJURY OR DEATH may result if personnel fail to observe the following safety precautions. Batteries give off explosive hydrogen gas. Be careful making connections. Do not smoke when…Archive199 pagesEngineering
1-1. Purpose The purpose of this manual is to provide material costs, logistical, and engineering data for use in planning construction support for Army functions in the Theater of Operations (TO). The manual is part of the Army Facilities…Archive409 pagesEngineering
1-1. Purpose The purpose of this manual is to provide material costs, logistical, and engineering data for use in planning construction support for Army functions in the Theater of Operations (TO). The manual is part of the Army Facilities…Archive385 pagesEngineering
The purpose of this manual is to help personnel use the Army Facilities Components System (AFCS) and its products when preparing for and executing Army con- struction missions in a theater of operations (TO). 1-2. SCOPE This manual is a…Archive78 pagesEngineering
This revised manual is designed to help you operate all models of Caterpillar 130G Series Graders and to perform operator troubleshooting and maintenance on the equipment. 2. This manual is written in work package format: a. Chapters…Archive273 pagesEngineering
Stand clear of bays and winch cable during lifting and lowering operations. Ensure that roadway/bow foldlock latch is in good mechanical condition and securely latched before attempting to lift bays/pontons. Failure to comply may result in…Archive610 pagesEngineering
of liquid contaminants into the environment is in violation of state, federal, and military regulations. Refer to Army POL (WP 0001 00) for information concerning storage, use, and disposal of these liquids. Failure to comply may result in…Archive583 pagesEngineering
Section I. GENERAL INFORMATION 1-1. Purpose This manual is a guide for the inspection, maintenance, and repair of bridges for military installations. It is a source of reference for planning, estimating, and technical accomplishment of…Archive186 pagesEngineering
This manual furnishes information about products, practices, procedures, materials, equipment, methods, and safety measures used in the protective coating of buildings, structures, and other permanent facilities at DOD installations.…Archive318 pagesEngineering
This manual has been prepared by or for the Government and, except to the extent indicated below, is public property and not subject to copyright. Copyrighted material included in the manual has been used with the knowledge and permission…Archive158 pagesEngineering
1-1. Purpose This manual describes an unsurfaced road maintenance management system for use on military installations. This system is available in either a manual or computerized mode (Micro PAVER). The maintenance standards prescribed…Archive50 pagesEngineering
TM 5-628/AFR 91-44 1-2 maintenance is required to maintain this condition any condition which would warrant a restriction level, and repair work will generally be only minor. beyond normal operating practices or a suspension (2) 10…Archive62 pagesEngineering
Section A-Uses of Herbicides and Plant Growth Regulators 1-1 . Beneficial Uses . Mechanical and manual methods once were the only effective means of controlling vegetation on military installations . Today, herbicides and plant growth…Archive178 pagesEngineering
This publication is prepared as a solid waste management planning guide for Defense Department personnel who are responsible for waste disposal. THE principles prescribed conform to requirements of the Resource Conservation and Recovery…Archive282 pagesEngineering
and scope. systems in good operating condition. This includes a. This technical manual provides basic information for facilities personnel regarding the operation and maintenance of small heating systems and related equipment. Generally,…Archive168 pagesEngineering
REPRODUCTION AUTHORILATION/RESTRICTlONS This manual has been prepared by or for the Government and, except to the extent indicated below, is public property and not subject to copyright. Reprint or republication of this manual should…Archive144 pagesEngineering
and scope. This manual provides guidance to facilities maintenance personnel in the maintenance of interior electrical systems of 600 volts and less. These systems include such components as illumination, low voltage systems, rotating…Archive180 pagesEngineering
Section I - PRIMARY CONSIDERATIONS 1-1. Purpose and scope. This manual provides guidance for the maintenance and repair of exterior electrical distribution systems. New construction of exterior electrical facilities, even when funded from…Archive201 pagesEngineering
INTRODUCTION/SAFETY l-1. Purpose This manual contains a generalized overview of the fundamentals of transformer theory and operation. The transformer is one of the most reliable pieces of electrical distribution equipment (see figure l-l).…Archive62 pagesEngineering
1-1. Purpose. This manual provides guidance required to identify the voltage and frequency standards of various foreign countries for both medium and low voltage systems. It also identifies the classes of equipment that are sensitive to…Archive31 pagesEngineering
The purpose of this manual is to familiarize qualified personnel with problem areas of supplying electrical power to automated data processing (ADP) systems. Special emphasis is placed on areas most often overlooked or misunderstood by…Archive165 pagesEngineering
The purpose of this manual is to present an integrated set of design and installation requirements for grounding and bonding practices in new and existing Command, Control, Communications, Computer, Intelligence, Surveillance, and…Archive183 pagesEngineering
This document provides generic guidance to agencies responsible for the development and implementation of maintenance programs for site utility systems at Command, Control, Communications, Computers, Intelligence, Surveillance, and…Archive261 pagesEngineering
This document has been prepared to provide generic guidance to agencies responsible for the development and implementation of maintenance programs for site utility systems at command, control, communications, computers, intelligence,…Archive213 pagesEngineering
The purpose of this publication is to provide guidance for facilities engineers in selecting, installing, and maintaining an uninterruptible power supply (UPS) system after the decision has been made to install it. This technical manual…Archive139 pagesEngineering
The purpose of this publication is to provide guidance to engineering managers/planners for the commissioning of electrical systems at command, control, communications, computer, intelligence, surveillance, and reconnaissance (C4ISR)…Archive108 pagesEngineering
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.