TM 5-820-1 ·Army ·1987 Surface Drainage Facilities for Airfields and Heliports
This manual has been prepared by or for the Government and, except to the extent indicated below, is public property and not subject to copyright. Copyrighted material included in the manual has been used with the knowledge and permission…
TM 5-820-3 ·Army ·1991 Drainage and Erosion-Control Structures for Airfields and Heliports
Purpose. the design of all drainage structures must be emThis manual discusses water disposal methods which ensure the safe and efficient operation of airport and heliport facilities, to describe an efficient drainage system, and to detail…
TM 5-820-4 ·Army ·1983 Drainage for Areas Other Than Airfields
and scope. The purpose of this manual is to discuss normal requirements for design of surface and subsurface drainage systems for military construction other than airfields and heliports at Army, Air Force and similar installations. Sound…
TM 5-822-10 ·Army ·1988 Standard Practice for Pavement Recycling
and scope. This manual contains guidance for preparing plans and specifications and for ensuring the quality of recycled bituminous and portland cement concrete. In addition, this manual provides useful information to design engineers,…
TM 5-822-11 ·Army ·1993 Standard Practice for Sealing Joints and Cracks in Rigid and Flexible Pavements
TM 5-822-11/AFP 88-6, Chap. 7 1-1 CHAPTER 1 GENERAL 1-1. Purpose. This manual contains guidance for ensuring the quality of joint and crack sealing or resealing of bituminous and portland cement 1-3. References. Appendix A contains a list…
TM 5-822-12 ·Army ·1990 Design of Aggregate Surfaced Roads and Airfields
This manual has been prepared by or for the Government and is public property and not subject to copyright. Reprints or republications of this manual should include a credit substantially as follows: "Department of the Army, Technical…
TM 5-822-14 ·Army ·1994 Soil Stabilization for Pavements
1-1. Purpose. This manual establishes criteria for improving the engineering properties of soils used for pavement base courses, subbase courses, and subgrades by the use of additives which are mixed into the soil to effect the desired…
TM 5-822-2 ·Army ·1987 General Provisions and Geometric Design for Roads, Streets, Walks, and Open Storage Areas
and scope. This manual establishes general provisions and geometric design criteria for guidance in the design of roads, streets, walks, and open storage areas at military installations. 1-2. Definitions. The definitions presented below…
TM 5-822-5 ·Army ·1992 Pavement Design for Roads, Streets, Walks, and Open Storage Areas
1-1. Purpose. (5) Modulus of rupture (flexural strength) for This manual provides criteria for the design of pavements for roads, streets, walks, and open storage areas at U.S. Army and Air Force installations. 1-2. Scope. This manual…
TM 5-822-7 ·Army ·1987 Standard Practice for Concrete Pavements
STANDARD PRACTICE FOR CONCRETE PAVEMENTS 1. Purpose. This manual provides information on the materials and construction procedures for concrete pavements. 2. Scope. This manual describes the constituents to be used in concrete, the…
TM 5-822-9 ·Army ·1989 Repair of Rigid Pavements Using Epoxy Resin Grouts, Mortars, and Concretes
TM 5-822-9/AFM 88-6, Chap.10 2 proper conditions are provided as described herein. Generally pavement repairs with epoxy materials shall not be initiated unless the air and pavement temperatures are above 40 degrees F and rising. Class A…
TM 5-823-4 ·Army ·1987 Marking of Army Airfield-Heliport Operational and Maintenance Facilities
TM 5-823-4 CHAPTER 1 GENERAL 1-1. Purpose. Runway and taxiway markings are essential for the safe and efficient use of airfields and heliports, and their effectiveness is dependent upon proper markings and maintenance to maintain an…
TM 5-830-3 ·Army ·1987 Dust Control for Roads, Airfields, and Adjacent Areas
1-1. Purpose This manual provides guidance for dust control methods and materials that can be used successfully at airfields and heliports to stop dust from forming naturally or as a result of man's activities and to control dust in areas…
TM 5-850-1 ·Army ·1983 Engineering and Design of Military Ports
and scope. This manual establishes criteria for guidance of Corps of Engineers personnel in the planning and design of proposed military ports. It includes site selection and evaluation, layout of harbor facilities, coastal protection…
TM 5-852-1 ·Army ·1987 Arctic and Subarctic Construction: General Provisions
a. The Arctic and Subarctic may be defined in several different ways, depending on whether they are looked at from the point of view of astronomy, botany, physics, climatology, ocean navigation or other specialized field. For engineering,…
TM 5-852-2 ·Army ·1990 Arctic and Subarctic Construction: Site Selection and Development
The importance of the proper selection of a construction site in arctic and subarctic regions cannot be over-emphasized. The type of data to be collected for the selection of a site is essentially the same as that used for engineering…
TM 5-852-4 ·Army ·1983 Arctic and Subarctic Construction: Foundations for Structures
and scope. a. This manual provides criteria and guidance for design of foundations for structures for military facilities in arctic and subarctic regions. b. To facilitate the use of this manual, superscript numbers are used to refer to…
TM 5-852-5 ·Army ·1987 Arctic and Subarctic Construction: Utilities
TM 5-852-5/AFR 88-19, Volume 5 1-1 CHAPTER 1 GENERAL 1-1. Purpose. uncommon for air temperatures to remain below -30 The purpose of this manual is to provide criteria and guidance for design of utility systems for military facilities in…
TM 5-852-6 ·Army ·1988 Arctic and Subarctic Construction: Calculation Methods for Determination of Depths of Freeze and Thaw in Soils
and scope . This manual contains criteria and methods for calculating the depths of freeze and thaw insoils,with consideration of the effects of other adjacent materials, for the design of military facilities in seasonal frost, arctic and…
TM 9-1375-213-12-1 ·Army ·Undated Demolition Materials -- Demolition Kit, Cratering: M180 and Demolition Kit, Cratering, Training: M270 (Inert)
Operator's and organizational maintenance manual, including repair parts and special tools list, for the M180 cratering demolition kit and the M270 (inert) cratering training demolition kit.
TM 9-1375-213-34 ·Army ·1996 Direct Support and General Support Maintenance Manual: Demolition Materials
Section I. GENERAL 1-1. Scope a. This technical manual describes general and technical information, and inspection and maintenance procedures for demolition materials. Information in this manual covers the responsibilities of direct and…
UFC 4-860-02N ·Army ·2004 Design: Trackage
The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense Agencies,…
TM-9-1375-213-34&P Direct & General Support Maintenance Manu ·Army ·1996 DS and GS Maintenance Manual Including Repair Parts and Special Tools List: Demolition Materials
Section I. GENERAL 1-1. Scope a. This technical manual describes general and technical information, and inspection and maintenance procedures for demolition materials. Information in this manual covers the responsibilities of direct and…
TM5-689 ·Army ·2001 ADP/Computer Electrical Installation and Inspection for C4ISR Facilities
The purpose of this manual is to familiarize qualified personnel with problem areas of supplying electrical power to automated data processing (ADP) systems. Special emphasis is placed on areas most often overlooked or misunderstood by…
TM5-690 grounding ·Army ·2002 Grounding and Bonding in C4ISR Facilities
The purpose of this manual is to present an integrated set of design and installation requirements for grounding and bonding practices in new and existing Command, Control, Communications, Computer, Intelligence, Surveillance, and…
TM5-693 UPS ·Army ·2002 Uninterruptible Power Supply System Selection, Installation, and Maintenance for C4ISR Facilities
The purpose of this publication is to provide guidance for facilities engineers in selecting, installing, and maintaining an uninterruptible power supply (UPS) system after the decision has been made to install it. This technical manual…
TM5-694 comm elec ·Army ·2002 Commissioning of Electrical Systems for C4ISR Facilities
The purpose of this publication is to provide guidance to engineering managers/planners for the commissioning of electrical systems at command, control, communications, computer, intelligence, surveillance, and reconnaissance (C4ISR)…
TM5-697 comm mech ·Army ·2002 Commissioning of Mechanical Systems for C4ISR Facilities
The purpose ofthis study was to identify deficiencies in the operation ofenergy systems within the commissary. The overall goal of this work was to investigate methods for more efficient design and operation of DeCA facilities . TM 5-697…
TM5-698-1 ·Army ·2003 Reliability/Availability of Electrical and Mechanical Systems for C4ISR Facilities
The purpose of this technical manual is provide facility managers with the information and procedures necessary to baseline the reliability and availability of their facilities, identify "weak links", and to implement cost-effective means…
TM5-813-4 h2o storage ·Army ·1985