This is a digital copy of a book that was preserved for generations on library shelves before it was carefully scanned by Google as part of a project to make the world's books discoverable online. It has survived long enough for the…Historic439 pagesComms Signal
Operator's and organizational maintenance manual for Radio Set AN/GRC-143, covering operation and maintenance of the radio terminal including its power amplifier RF AM-6090/GRC-143.Historic248 pagesComms Signal
REGO DION ee eae Security or digital data equipment. Transmission and reception power requirements: Transmission Reception Type of modulation Transmitter output power Type of squelch Distance range Types of antennas: Short antenna Voice…Historic114 pagesComms Signal
Operator and organizational maintenance manual for Power Supplies PP-4763/GRC and PP-4763A/GRC, covering description, installation, operating instructions, and operator maintenance.Historic36 pagesComms Signal
(fig. 6-2) Receiver-Transmitter, Radio RT-348/ARC-54 receives and transmits frequency-modulated sig- nals in the frequency range of 30 to 69.95 mc. The receiver-transmitter unit is a combination double- conversion superheterodyne receiver…Historic454 pagesComms Signal
A monitor meter and a meter switch are located on the front panel for checking the receivertransmitter. A coaxial cable connects the REC. IF OUT connector to the REC. IF IN connector on the right side of the front panel. A coaxial cable…Historic48 pagesComms Signal
TM 11-5825-231-10 modulated (am) signal and the secondary console a frequency modulated (fm) signal. e. The primary and secondary consoles dif- fer physically in that different alternating current (ac) input panels are used and that the…Historic92 pagesComms Signal
A3-1. Scope This appendix lists only basic issue items required by the crew/ operator for installation, operation, and maintenance of Signal Lamp Equipments SE-11 and SE-ll-A. IHistoric65 pagesComms Signal
1. Scope a. This manual covers field and depot main- tenance for Receiver, Radio R-943/USD-1 (fig. 1). It includes instructions appropriate to third, fourth, and fifth echelons for trouble- shooting, testing, aligning, and repairing the…Historic116 pagesComms Signal
TM 11-5895-532-12 Section II. 1-6. Purpose and Use Interrogator Set AN/TPX-46(V) is an easily trans- portable identification friend or foe (iff) set, in five configurations. The AN/TPX-46(V)1 is designed for use at improved HAWK sites, the…Historic288 pagesComms Signal
WARNING HIGH VOLTAGE is used in the operation of this equipment, DEATH ON CONTACT may result if operating personnel fail to observe safety precautions.Historic232 pagesComms Signal
(1) Plate Supply Unit PE-97-(*) (issued only with Radio Sets SCR-510-A and SCR-510-B) is a vibrator- type power sup ply designed for connection to either a 6-volt or a 12-volt vehicular battery. Hooks and catch clips are provided for…Historic171 pagesComms Signal
Section I. GENERAL 1. Scope a. This technical manual contains the neces- sary instructions for the installation, operation, maintenance, and repair of Radio Set AN/VRC -2X (fig. 1), and Radio Set AN/VRC-2 (figs. 6, 7, and 8) In addition to…Historic208 pagesComms Signal
Add section I.1 after section I. Section I.1. 85.6. Scope of Organizational Maintenance Organizational maintenance duties are listed below, together with a reference to the para- graphs covering the specific maintenance func- tion. a.…Historic158 pagesComms Signal
1. Scope This manual lists spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE), and other special support equip- ment required for performance of organizational, direct support, and general…Historic56 pagesComms Signal
Section GENERAL 1. Scope a. This technical manual contains instructions for the use of all concerned. It contains instruc- tions necessary for the installation, operation, maintenance, and repair of Radio Set AN/GRC— 10, Radio Terminal Set…Historic283 pagesComms Signal
l/S WAR DEPARTMENT 1 M d dre TECHNICAL MANUAL RADIO SETS SCR-609-A AND-B AND SGR-610-A AND-B the property of the United States Government, and is printed and distributed solely aval, and civilian personnel of the War and Navy Departments,…Historic113 pagesComms Signal
Technical manual for Radio Set AN/TRC-8, Radio Terminal Set AN/TRC-11, and Radio Relay Set AN/TRC-12, covering description, installation, controls, operation, performance and preventive maintenance checks, theory, and troubleshooting.Historic233 pagesComms Signal
salvaging this equipment for his benefit. , or when you are in immediate danger of -axes, pick axes, hammers, crowbars, tc. me-throwers, incendiary greNT, etc. es, other holes. Throw in sycams. destruction of this equipment. tuning…Historic217 pagesComms Signal
WARNING HIGH VOLTAGE is used in the operation of this equipment DEATH ON CONTACT may result if operating personnel fail to obserye safety precautions. Be careful not to contact high-voltage connections or 115-volt input connections when…Historic437 pagesComms Signal
C 1, TM 11-642 . TO 16-30VRC20-5 DEPARTMENT OF THE ARMY TECHNICAL MANUAL DEPARTMENT OF THE AIR FORCE TECHNICAL ORDER RADIO SETS AN/VRC-20, AN/VRC-21, AND AN/VRC-22 C 1, TM 11-642 TO 16-80VRC20-5 TM 11-642/TO 16-30VRC20-5, 11 July 1952, is…Historic232 pagesComms Signal
5. System Application a. The receiving set is the radio receiving link in a radioteletype communications system. The rela- tionship of the receiving set to other equipments that are required to form a space diversity radio- teletype…Historic93 pagesComms Signal
Section I . DEVELOPMENT AND DESCRIPTION 1. General Early methods of communication seem prim itive when compared with present day systems. These early methods included signaling audibly by gunfire, drums, and other loud noises, and visually…Historic104 pagesComms Signal
a. The success of modern military operations, as well as of the peacetime activities of the armed forces, depends in a great measure on signal communication facilities. Whether on the offense or the defense, in the front lines or far…Historic229 pagesComms Signal
TM 11-6625-595-34 Section I. GENERAL 1-1. Scope This manual covers direct and general support maintenance for Wattmeter ME-82/U (fig. 1-1). It includes instructions for troubleshooting, testing, and repairing of the ME82/U, and replacing…Historic25 pagesComms Signal
6. Description (fig. 1) The test set meter and controls are assembled on a panel within a metal case. The case is equipped with cushioned feet, a carrying handle, and a removable cover that is secured by latches. Four single-conductor and…Historic28 pagesComms Signal
Be careful when working on the 450-volt plate and power supply circuits, or on the 115-volt ac line connections. Dangerous voltages exist at these points. DON'T TAKE CHANCES!Historic36 pagesComms Signal
Field and depot maintenance manual for Electron Tube Test Sets TV-7/U, TV-7A/U, TV-7B/U, and TV-7D/U, covering theory of operation, troubleshooting, repair, and alignment.Historic78 pagesComms Signal
Be careful not to contact high-voltage connections or the 115-volt ac input connections when replacing tubes in the test set. Voltages up to 300 volts ac may be encountered in this equipment. Serious injury or death may result from contact…Historic64 pagesComms Signal
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.