Refer to the Table of Contents to find out where information can be found. The Table of Contents lists each chapter title and section heading.Archive239 pagesComms Signal
TM 11-5840-281-12-1 1-10. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. (CONT) AZIMUTH ANTENNA DRIVE ROTARY COUPLER SPEED REDUCER DRIVE MOTOR AZIMUTH ANTENNA DRIVE 305NE004 The azimuth antenna drive is attached to the elevation antenna…Archive344 pagesComms Signal
A3-1. Scope This appendix lists only basic issue items required by the crew/ operator for installation, operation, and maintenance of Signal Lamp Equipments SE-11 and SE-ll-A. IHistoric65 pagesComms Signal
Rotate the lock knobs of the boresight mount assembly forward (toward objective lens) until they come to a stop on the pins on the assembly. c. Slide the boresight mount assembly onto the guide rail of the M60 adapter assembly from the…Archive54 pagesMarksmanship Weapons
The image intensifier tube phosphor screens contain toxic materials. If a tube becomes broken, avoid inhalation of the phosphor screen material and do not allow it to come in contact with the mouth or open skin wounds.Archive55 pagesMarksmanship Weapons
Section I. 1-1. Scope a. This manual contains organizational and direct support (DS) maintenance instructions for Night Vision Sight AN/PVS-3 and AN/PVS-3A (night sights). It includes basic functioning of the night sight, troubleshooting,…Archive41 pagesMarksmanship Weapons
Hand receipt manual covering the end item/components of end item (COEI), basic issue items (BII), and additional authorization list (AAL) for Night Vision Sight, Crew Served Weapon AN/TVS-5, provided on a preprinted DA Form 2062 to aid…Archive10 pagesMarksmanship Weapons
Section I. GENERAL 1-1. Scope a. This manual describes Searchlight Set, Infrared AN/VSS-3 and covers its installation and operation, and operator and organizational maintenance. It includes operation under usual and unusual conditions,…Archive64 pagesMarksmanship Weapons
1-1. Scope a. This manual covers direct support, general support, and depot maintenance for Searchlight Set, Infrared AN/VSS-3. It includes instructions appropriate to direct support, general support, and depot maintenance for…Archive155 pagesMarksmanship Weapons
ble) that will be useful in identifying and controlling the item. Serial number to be inserted and initialed on all copies by the hand receipt holder. h. T 1(a). Quantity of each item as listed in the COEI, BII, and AAL. i. C 2(t). Leave…Archive9 pagesMarksmanship Weapons
2—1. General a. The TD-204/U or TD-754/G, TD-206/G, and TD-352/U are pulse-code modulation components used as part of multichannel communication systems. These systems use radio or cable, or combinations of both as transmission mediums.…Archive94 pagesComms Signal
1. Scope a. This manual covers field and depot main- tenance for Receiver, Radio R-943/USD-1 (fig. 1). It includes instructions appropriate to third, fourth, and fifth echelons for trouble- shooting, testing, aligning, and repairing the…Historic116 pagesComms Signal
WARNING HIGH VOLTAGE is used in this equipment. DEATH ON CONTACT MAY RESULT IF SAFETY PRECAUTIONS ARE NOT OBSERVED Maintenance adjustments of this equipment are made with power applied: Be careful when working near the interior of the…Archive254 pagesComms Signal
TM 11-5895-532-12 Section II. 1-6. Purpose and Use Interrogator Set AN/TPX-46(V) is an easily trans- portable identification friend or foe (iff) set, in five configurations. The AN/TPX-46(V)1 is designed for use at improved HAWK sites, the…Historic288 pagesComms Signal
Section I. GENERAL 1-1. Scope a. This manual describes Antenna Group OE-254/GRC (fig. 1-1) and provides instruction for installation, operation, and maintenance. It includes instructions for operation under usual and unusual conditions,…Archive80 pagesComms Signal
WARNING HIGH VOLTAGE is used in the operation of this equipment, DEATH ON CONTACT may result if operating personnel fail to observe safety precautions.Historic232 pagesComms Signal
(1) Plate Supply Unit PE-97-(*) (issued only with Radio Sets SCR-510-A and SCR-510-B) is a vibrator- type power sup ply designed for connection to either a 6-volt or a 12-volt vehicular battery. Hooks and catch clips are provided for…Historic171 pagesComms Signal
Section I. GENERAL 1. Scope a. This technical manual contains the neces- sary instructions for the installation, operation, maintenance, and repair of Radio Set AN/VRC -2X (fig. 1), and Radio Set AN/VRC-2 (figs. 6, 7, and 8) In addition to…Historic208 pagesComms Signal
Add section I.1 after section I. Section I.1. 85.6. Scope of Organizational Maintenance Organizational maintenance duties are listed below, together with a reference to the para- graphs covering the specific maintenance func- tion. a.…Historic158 pagesComms Signal
1. Scope This manual lists spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE), and other special support equip- ment required for performance of organizational, direct support, and general…Historic56 pagesComms Signal
Operator's, organizational, direct support, and general support maintenance manual for Power Supply PP-6224B/U, covering equipment description, operation instructions, operator PMCS, and maintenance procedures.Archive132 pagesComms Signal
1. Scope This manual lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for performance of organizational, direct support,…Archive48 pagesComms Signal
Section GENERAL 1. Scope a. This technical manual contains instructions for the use of all concerned. It contains instruc- tions necessary for the installation, operation, maintenance, and repair of Radio Set AN/GRC— 10, Radio Terminal Set…Historic283 pagesComms Signal
l/S WAR DEPARTMENT 1 M d dre TECHNICAL MANUAL RADIO SETS SCR-609-A AND-B AND SGR-610-A AND-B the property of the United States Government, and is printed and distributed solely aval, and civilian personnel of the War and Navy Departments,…Historic113 pagesComms Signal
Technical manual for Radio Set AN/TRC-8, Radio Terminal Set AN/TRC-11, and Radio Relay Set AN/TRC-12, covering description, installation, controls, operation, performance and preventive maintenance checks, theory, and troubleshooting.Historic233 pagesComms Signal
salvaging this equipment for his benefit. , or when you are in immediate danger of -axes, pick axes, hammers, crowbars, tc. me-throwers, incendiary greNT, etc. es, other holes. Throw in sycams. destruction of this equipment. tuning…Historic217 pagesComms Signal
WARNING HIGH VOLTAGE is used in the operation of this equipment DEATH ON CONTACT may result if operating personnel fail to obserye safety precautions. Be careful not to contact high-voltage connections or 115-volt input connections when…Historic437 pagesComms Signal
C 1, TM 11-642 . TO 16-30VRC20-5 DEPARTMENT OF THE ARMY TECHNICAL MANUAL DEPARTMENT OF THE AIR FORCE TECHNICAL ORDER RADIO SETS AN/VRC-20, AN/VRC-21, AND AN/VRC-22 C 1, TM 11-642 TO 16-80VRC20-5 TM 11-642/TO 16-30VRC20-5, 11 July 1952, is…Historic232 pagesComms Signal
5. System Application a. The receiving set is the radio receiving link in a radioteletype communications system. The rela- tionship of the receiving set to other equipments that are required to form a space diversity radio- teletype…Historic93 pagesComms Signal
Section I . DEVELOPMENT AND DESCRIPTION 1. General Early methods of communication seem prim itive when compared with present day systems. These early methods included signaling audibly by gunfire, drums, and other loud noises, and visually…Historic104 pagesComms Signal
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.