and scope. The purpose of this manual is to discuss normal requirements for design of surface and subsurface drainage systems for military construction other than airfields and heliports at Army, Air Force and similar installations. Sound…Archive112 pagesEngineering
and scope. This manual contains guidance for preparing plans and specifications and for ensuring the quality of recycled bituminous and portland cement concrete. In addition, this manual provides useful information to design engineers,…Archive39 pagesEngineering
TM 5-822-11/AFP 88-6, Chap. 7 1-1 CHAPTER 1 GENERAL 1-1. Purpose. This manual contains guidance for ensuring the quality of joint and crack sealing or resealing of bituminous and portland cement 1-3. References. Appendix A contains a list…Archive52 pagesEngineering
This manual has been prepared by or for the Government and is public property and not subject to copyright. Reprints or republications of this manual should include a credit substantially as follows: "Department of the Army, Technical…Archive19 pagesEngineering
1-1. Purpose. This manual establishes criteria for improving the engineering properties of soils used for pavement base courses, subbase courses, and subgrades by the use of additives which are mixed into the soil to effect the desired…Archive57 pagesEngineering
and scope. This manual establishes general provisions and geometric design criteria for guidance in the design of roads, streets, walks, and open storage areas at military installations. 1-2. Definitions. The definitions presented below…Archive42 pagesEngineering
1-1. Purpose. (5) Modulus of rupture (flexural strength) for This manual provides criteria for the design of pavements for roads, streets, walks, and open storage areas at U.S. Army and Air Force installations. 1-2. Scope. This manual…Archive118 pagesEngineering
STANDARD PRACTICE FOR CONCRETE PAVEMENTS 1. Purpose. This manual provides information on the materials and construction procedures for concrete pavements. 2. Scope. This manual describes the constituents to be used in concrete, the…Archive55 pagesEngineering
TM 5-822-9/AFM 88-6, Chap.10 2 proper conditions are provided as described herein. Generally pavement repairs with epoxy materials shall not be initiated unless the air and pavement temperatures are above 40 degrees F and rising. Class A…Archive15 pagesEngineering
TM 5-823-4 CHAPTER 1 GENERAL 1-1. Purpose. Runway and taxiway markings are essential for the safe and efficient use of airfields and heliports, and their effectiveness is dependent upon proper markings and maintenance to maintain an…Archive42 pagesEngineering
1-1. Purpose This manual provides guidance for dust control methods and materials that can be used successfully at airfields and heliports to stop dust from forming naturally or as a result of man's activities and to control dust in areas…Archive42 pagesEngineering
and scope. This manual establishes criteria for guidance of Corps of Engineers personnel in the planning and design of proposed military ports. It includes site selection and evaluation, layout of harbor facilities, coastal protection…Archive146 pagesEngineering
a. The Arctic and Subarctic may be defined in several different ways, depending on whether they are looked at from the point of view of astronomy, botany, physics, climatology, ocean navigation or other specialized field. For engineering,…Archive55 pagesEngineering
The importance of the proper selection of a construction site in arctic and subarctic regions cannot be over-emphasized. The type of data to be collected for the selection of a site is essentially the same as that used for engineering…Archive27 pagesEngineering
and scope. a. This manual provides criteria and guidance for design of foundations for structures for military facilities in arctic and subarctic regions. b. To facilitate the use of this manual, superscript numbers are used to refer to…Archive269 pagesEngineering
TM 5-852-5/AFR 88-19, Volume 5 1-1 CHAPTER 1 GENERAL 1-1. Purpose. uncommon for air temperatures to remain below -30 The purpose of this manual is to provide criteria and guidance for design of utility systems for military facilities in…Archive82 pagesEngineering
and scope . This manual contains criteria and methods for calculating the depths of freeze and thaw insoils,with consideration of the effects of other adjacent materials, for the design of military facilities in seasonal frost, arctic and…Archive62 pagesEngineering
Remove and insert pages as indicated below. New or changed text is indicated by a vertical bar in the margin. An illustration change is indicated by a miniature pointing hand.Archive149 pagesSustainment
Section I. GENERAL INFORMATION 1-1. SCOPE MODEL NUMBER AND NAME: RS-4-TC-1A, 60-ton diesel-electric locomotive. PURPOSE OF EQUIPMENT: Used for yard switching. Can be used as a single unit or connected in multiple unit operation under one…Archive268 pagesSustainment
Section I. GENERAL INFORMATION 1-1. SCOPE MODEL NUMBER AND NAME: B-B-160/160-4GE747-A1, 80-ton diesel-electric locomotive. PURPOSE OF EQUIPMENT: Used for yard switching or short line railway service. Can be used as a single unit or…Archive274 pagesSustainment
Section I. GENERAL INFORMATION 1-1. SCOPE MODEL NUMBER AND NAME: B-B-160/160-4GE747-A1, 80-ton diesel-electric locomotive. PURPOSE OF EQUIPMENT: Used for general yard switching or short-line railway service. Can be used as a single unit or…Archive419 pagesSustainment
TM 55-2220-058-14 CHAPTER 2 TRANSPORTABILITY DATA 2-1 Scope This chapter contains the description, characteristics, and other data pertaining to the 68-foot, 140ton, chain-tiedown DODX flatcar, which will be referred to throughout this…Archive75 pagesSustainment
Provide guidance and procedures for the collecting, processing, storage and shipment of blood for the Armed Services as directed in Department of Defense (DOD) Instruction 6480.4.Archive56 pagesMedical TCCC
This Joint Blood Program Handbook outlines the functions and responsibilities of the operating elements of the Armed Services Blood Program (ASBP) that could be required to ensure the management and distribution of Class VIII B (Blood)…Archive76 pagesMedical TCCC
Be sure to clear weapon before disassembling, cleaning, inspecting, transporting or storing. 2. Stay clear of muzzle and always keep weapon pointed downrange. 3. Keep safety on until you are ready to fire. 4. Before firing, make sure the…Archive239 pagesMarksmanship Weapons
Section score. . Type of Manual, This manual is for use by ‘operator, organizational, direct support, and general ‘support maintenance personnel and Includes repalr part and special toots for operation and maintenance of -38 caliber…Archive137 pagesMarksmanship Weapons
This appendix lists basic issue items and items troop installed or authorized required by the crew/operator for operation of -the 7.62-mm Rifles, M14 and M14A1.Archive119 pagesMarksmanship Weapons
M14(M) and are required by the operator for installation, operation, or maintenance. b. Maintenance and Operating Supplies-Section III. A listing of maintenance and operating supplies required for initial operation. c. Prescribed Load…Archive26 pagesMarksmanship Weapons
EQUIPMENT DESCRlPTlON AND DATA 0002 00 EQUIPMENT CHARACTERISTICS, CAPABlLlTlES AND FEATURES. The M60 and M60D are air-cooled and have fixed headspace allowing quick barrel changes for cooling and maintenance when required. In order to…Archive220 pagesMarksmanship Weapons
WARNING The M240 Series Machine Guns must be inspected and gaged at least once annually for safety and serviceability. Initial gaging is required one year from receipt of the weapons. Air Force users refer to inspection requirements in Air…Archive333 pagesMarksmanship Weapons
Start With The Right Holster
Get 10% off your first T.REX holster, access to behind the scenes content, exclusive articles, and product updates delivered to your inbox.