TM 9-1005-319: Unit and Direct Support Maintenance Manual for Rifle, 5.56 mm, M16A2

TM 9-1005-319 Unit and Direct Support Maintenance Manual for Rifle, 5.56 mm, M16A2

TM 9-1005-319

Unit and Direct Support Maintenance Manual for Rifle, 5.56 mm, M16A2

Army · TM · Aug 1987 · 325 pages

About

ARMY TM 9-1005-319-23&P AIR FORCE TO 11W3-5-5-42 WARNING ALL WARNINGS in this technical manual pertain to both the rifle and the carbines unless otherwise specified. Before starting an inspection, be sure to clear the rifle. Do not pull the trigger until the rifle has been cleared. Inspect the chamber to ensure that it is empty and no ammunition is in position to be chambered. Do not keep live ammunition near work area. To avoid injury to your eyes, use care when removing and installing spring-loaded parts. All M1 6A2 rifles and M4 carbines must be inspected and gaged at least once annually for safety and serviceability. Initial gaging is required 1 year from receipt of the weapons. Air Force users refer to inspection requirements in Air Force Manual (AFM) 36-2227, Volume 1.

DesignationTM 9-1005-319

EditionAug 1987

StatusSuperseded

Pages325

FunctionMarksmanship Weapons

CollectionRecent Archive

Public domain (U.S. Government work)

References 16

TM 9-1005Not in the Vault
TM 9Not in the Vault
TM 9-1005-319-23LPNot in the Vault
TM 750-244-7Not in the Vault
TM 9-1010-221-23Not in the Vault
TM 9-6920-363-12Not in the Vault
TM 11-5855-213-23Not in the Vault
TM 9-6920-746-12Not in the Vault
TM 1Not in the Vault
TM 4700-15Not in the Vault
FMFM 1-3ANot in the Vault