TM 11-5064: Sound Recorder-Reproducer Sets AN/FNQ-2 and AN/FNQ-2A (Soundscriber Model 5DR)

TM 11-5064 Sound Recorder-Reproducer Sets AN/FNQ-2 and AN/FNQ-2A (Soundscriber Model 5DR)

TM 11-5064

Sound Recorder-Reproducer Sets AN/FNQ-2 and AN/FNQ-2A (Soundscriber Model 5DR)

Army · TM · Sep 1954 · 88 pages

About

placed on the turntable. An index scale for timing the recorder and re- producer arms is mounted on the front cover. The index scale is graduated in 14-minute intervals up to 15 minutes. (3) The motorboard (fig. 20) mounts a turntable, a motor, sealed-in gears, a recorder arm, a reproducer arm, a reproducer-head latch, three micro- switches, and an optical system that focuses light from the index lamp onto the index scale. The turntable is made of heavy zinc casting, upon which a bakelite shell is placed. An extra protective disk rests on the shell to prevent damage to the styluses. (4) The reproducer amplifier card (fig. 20) mounts the tubes and circuit ele- ments that are used for amplifying signals from the reproducer heads mounted on units A and B. The card connects to a receptacle on the chassis. The output stage of the amplifier is mounted on the chassis.

DesignationTM 11-5064

EditionSep 1954

StatusSuperseded

Pages88

FunctionComms Signal

CollectionHistoric

Public domain (U.S. Government work)

References 23

TM 11-2088Not in the Vault
TM 5064Not in the Vault
TM 5064-2Not in the Vault
TM 5064-5Not in the Vault
TM 5064-46Not in the Vault
TM 5064-37Not in the Vault
TM 5064-38Not in the Vault
TM 5064-47Not in the Vault
TM 5064-39Not in the Vault
TM 5064-45Not in the Vault
TM 5064-44Not in the Vault
TM 5064-41Not in the Vault
TM 6064Not in the Vault
TM 5064-34Not in the Vault
TM 5064-14Not in the Vault
TM 6064-16Not in the Vault
TM 5064-17Not in the Vault
TM 5064-22Not in the Vault
TM 5064-23Not in the Vault
TM 5064-25Not in the Vault
TM 5064-27Not in the Vault
TM 5064-31Not in the Vault
TM 5064-33Not in the Vault