Ships in 1-8 business days

The AC Uno is the cousin of our AC1 Plate Carrier. The same design and high quality. The same U.S. sourced and manufactured Berry-compliant materials, but possibly assembled under suspicious circumstances. It’s a complicated story with wild logistics, deception, and a full investigation, so watch the video below for the full details.

Some AC-Unos have slight blemishes but are still as fully functional as the AC1. For example, some stitching might be slightly off or the front ID panel might be canted slightly. They will sport a branding mark (U, X, J, M, or R) on the interior flap of the front and back plate bags and will be void of any “Made in USA” tags. All AC-Unos can be returned for a full refund within 30 days of purchase, but beyond that, all sales are final.
Sizing for plate carriers is based on the size of your plates. For fitment instructions, consult the AC1 Setup video.

All cummerbunds are the same length and height (4 inches), regardless of the size of the AC1.

Because plate sizes vary, there are slight differences in the total available length of cummerbund adjustment. This will cover the vast majority of individuals. If you’re worried about being too small or too large to wear a plate carrier, measure your torso circumference (the solar plexus is a good location from which to measure) and consider the following data:

Small will fit a torso of 30″ (min) to 56″ (max).
Medium will fit a torso of 32″ to 58″.
Large will fit a torso of 34″ to 60″.

Each cummerbund has three sizes of pockets per side:
Small pocket: 2.5″, Medium pocket: 3″, Large pocket: 4″.
Plate Type / Size x AC1 Size
AC1 Small
AC1 MediumAC1 Large
SAPI / ESAPI Cut Plates
Maximum thickness of 1.05″
Small – 8.75″ x 11.75″
Small Hesco 3810
Medium – 9.5″ x 12.5″
Large Hesco L210
Medium Hesco 3810
Large – 10.25″ x 13.25″
RMA 1155 – 10″ x 12″
Special Threat / Swimmer Plates
Maximum thickness of 1.05″
< 8.75″ x 11.75″
< 9.5″ x 12.5″ < 10.25″ x 13.25″
Steel Plates
May require backer / soft armor.
8 x 10″10″ x 12″ – Single Curve
10″ x 13″ – Single Curve (Some Plate exposed)
10″ X 13″
11″ X 14″ – Some plate exposed
10″ X 12″ – Multicurve Steel
Generic / Single Curve Plates
Level 3 & 4
Maximum thickness of 1.05″
8″ x 10″10″ x 12″ 10″ x 13″
Customer Service can be contacted via email at [email protected].
The AC-Uno has a 30-day warranty / return window.