Scalarworks PEAK Sights

Ships in 1-8 business days
This product is regulated by ITAR. It can only be shipped in the USA.

In Stock

While optics have advanced tremendously over the past few decades, iron sights are still very much the same. To keep up with modern optics, Scalarworks created the PEAK iron sights. They’re designed to interface with modern carbines in a way that older fixed irons simply do not, in that the PEAK adjust in the same increments as most red dot optics (.5 MOA/click). So, when acquiring zero with our Zero Target, all the adjustment data listed on the target applies to both your red dot optic and the PEAK iron sights. This consists of both the front and rear sight – we do not sell them separately.

They’re designed around a modern 15″ sight radius. While carbine length rifles have become the norm, most fixed iron sights still use components designed for the M16A2’s 20″ sight radius.

Peak Sights have manually adjustable elevation (front) and windage (rear): Both with a refined 0.5MOA/click, which matches most Red Dot sights’. The sight post is CNC machined to the correct width for a 15″ sight radius, non-rotating for finer adjustment, and flat faced to eliminate highlight bias.

Peak Sights have a streamlined profile free of protruding levers and knobs that won’t rap your knuckles, or get caught on clothing, gear, and surroundings.

The human eye intuitively centers objects within a bright aperture. Peak Sights have precision CNC milled apertures that are flat toward the shooter, so they won’t create highlight bias. Stock A2 peep apertures are cast and have a scallop facing the shooter that can generate a misleading highlight.

Meticulously machined to be the lightest fixed iron sights in existence, without compromising an ounce of strength.

*Fits MIL-STD-1913 Picatinny Rail
MATERIALS: 7075-T6 Aluminum + 4140H Steel
FINISHES: Type III Hard Anodizing + Flash Nitride®
ADJUSTMENT: 0.5MOA/Click @ 15″ Sight Radius
Front Sight ADJUSTMENT RANGE: 51MOA @ 15″ Sight Radius
Front Sights POST: 1.35mm (0.053″) width – Non-Rotating
Front Sight WEIGHT: 0.94oz (26.5g)

Rear Sight ADJUSTMENT RANGE: 46MOA @ 15″ Sight Radius
Rear Sight FLIP APERTURES: Same-Plane 0.07″/0.20″ Diameter
Rear Sight WEIGHT: 1.44oz (40.7g)

Every Peak sight is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.
Purchase includes: Scalarworks PEAK/Fixed sight(s), Nylok® treated cross bolt(s), T25 Torx driver bit, & Operator Manual.

Made in the U.S.A. by Scalarworks.